Dental laboratory ovens

Fully automatic high performance furnace for final sintering of distortion-free zirconium oxide frameworks By using the Ceramill Therm 3 high temperature furnace, zirconium oxide frameworks achieve their final density and the resulting ...

Shielding gas sinter furnace and flood chamber for Ceramill Sintron The CoCr sintering furnace Ceramill Argotherm 2 is an integral part of a system with optimally coordinated components for processing the sinter metal Ceramill Sintron. ...

Temperature range: 0 °C - 1,600 °C

High-speed sintering – so fast, so beautiful, so safe Together with the Zolid DRS material, the Ceramill Therm DRS sintering furnace forms the basis for the High-Speed Zirconia Kit and thus for the ultra-fast fabrication of zirconia ...

Temperature range: 0 °C - 1,150 °C
Capacity: 3.2 l

The laboratory furnaces of the RETOMAT series are specially designed for the precious metal and model casting technique. The RETOMAT MINI has a chamber size of 3.2 l. With the controller, you make the decision between a COMFORT controller ...

Temperature range: max 1650.0 °C

The redesigned HTS-2 model series combines the well-known features of previous models. The HTS-2 offers you not only the fusion of the properties of old models, but also a larger sintering capacity of up to 80 individual crowns. The ...

Temperature range: 1,650 °C

The optimal combination of proven technology and future-oriented innovations Due to significant further development of our heating technology, we have achieved a heating rate of up to 200°C/min and can thus meet our customers’ demands ...

Temperature range: 0 °C - 1,650 °C

even more efficient due to a larger capacity Due to the size of the heating chamber, it is now possible to process three sintering trays Ø= 120mm during the conventional long-term sintering. However, the heating system with six high-quality ...

Temperature range: 0 °C - 1,650 °C

Due to their maximum temperature and their large furnace chamber, the high-temperature sintering furnaces are perfectly suited for sintering translucent zirconia. The electrically driving lifting table significantly simplifies the charging ...

Temperature range: 1,200 °C

The vacuum firing furnace VL 01/12 LB is ideally suited for firing of conventional ceramic veneers under normal atmosphere or vacuum. The all-round heating of the furnace chamber results in a very even temperature uniformity and enables ...

Temperature range: 1,200 °C

The vacuum pressing furnace VL 01/12 LB Press is ideally suited for firing of conventional ceramic veneers under normal atmosphere or vacuum but also for processing of all common pressing ceramics. The all-round heating of the furnace ...

Temperature range: 100 °C - 1,180 °C

Designed for efficiency with the only dual table model that allows technicians to program each table independently—even when one is in firing. Quality Restorations FULLY ADAPTABLE PROGRAMMING range handles all ceramics and pressable ...

Temperature range: 1,800, 1,650 °C
Capacity: 90, 120 l

SINTRA PRO/90zr & SINTRA PRO/120zrf are at the forefront of the rapid evolution of sintering zirconia. TECHNOLOGY The visuals It’s all about accessibility and intuitiveness. The full touch 7” LCD screen is user friendly with ...

Temperature range: 100 °C - 1,200 °C

All horizon models are designed with a unique temperature control muffle that is highly accurate and guarantees quality firing every time. Quality Restorations PRECISE TEMPERATURE UNIFORMITY & CONTROL with firing temp. to 1180ºC (2156ºF) ...

Linear cooling thanks to an innovative fring chamber design and intelligent software! TTC - Mode The firing of dental ceramics on zirconia sub-structures carries a high risk of crack formation while cooling. With the VARIO PRESS 330.e ...

Temperature range: 1,200 °C

Designed as a press oven, outstanding as a furnace! The VARIOPRESS 330.e features a large and clear full touch display and intuitive menu navigation. This offers greater efficiency and ease of use. Intervening in a running program ...

Temperature range: 1,500 °C

LOW CONSEQUENTIAL COSTS IN DAILY USE INDIVIDUAL SINTERING PROCESS TIME-TEMPERATURE-COOLING (TTC), FOR LINEAR COOLING Full touch display and intuitive menu navigation MOLYBDENUM DISILICIDE HEATING ELEMENTS FOR SPEED AND LONG-TERM SINTERING ...

Temperature range: 1,700 °C

Zirkonofen 600/V2 (Sintering Furnace) - 2 MoSi2 heating elements - 5 preset programmes Technical data: Size (W x H x D): 28,5 x 60,5 x 43 cm Weight: 44 kg Output Power: 700 W Combustion Chamber Capacity: 0,6 l Dimension ...

Temperature range: 0 °C - 1,700 °C

Zirkonofen 600/V3 (Sintering Furnace) - 2 MoSi2 heating elements - New sintering technique - 12 preset programmes - Improved air circulation - Modern high quality full glazing - Individual sintering programmes on request - Updatable ...

Temperature range: 1,700 °C

Zirkonofen 700 (Sintering Furnace) - 4 MoSi2 heating elements - New sintering technique - 12 preset programmes - Larger combustion chamber - Modern high quality full glazing - Special sintering programmes on request - Updatable ...

Temperature range: 1,200 °C

AUSTROMAT™ 624i™ - The expert for perfect firing results. - Even heat distribution through closed chamber design - Automatic control of the drying and cooling to optimize aesthetics - DEKEMA-specific firing chamber concept for excellent ...

Temperature range: 1,200 °C

AUSTROMAT™ 654i™ - One for all – firing and pressing in perfection. - Even heat distribution through closed chamber design - Automatic control of the drying and cooling to optimize aesthetics - Multiple Press Time Automatic for optimal ...

Temperature range: 1,560 °C

AUSTROMAT™ 674i™ - The big one. - Already prepared for ultrafast cycles below 1 hour - DEKEMA patented high-temperature precision thermocouple design, suitable for speeding without overshooting temperature - DEKEMA patented tray ...

Temperature range: 0 °C - 1,200 °C
Capacity: 22 l

Automatic programmable dental furnace for metal, pure and press ceramics designed for all type of dental metal, pure and press ceramics no need of compressor for the pressing process auto calibration of the temperature 255 individual ...

Temperature range: 0 °C - 1,200 °C
Capacity: 22 l

Automatic programmable dental furnace for metal and pure ceramics. designed for all available types of dental metal ceramics 255 individual programs completely controlled process - 16 programmable parameters in every program improved ...

Temperature range: 0 °C - 1,200 °C
Capacity: 22 l

Programmable dental furnace for metal and pure ceramics designed for all type of dental metal and pure ceramics 200 operating programs completely controlled process of firing improved system of self-diagnostics auto calibration ...

Temperature range: max 1200.0 °C

Vacuum furnace Furnaces of last generation with quartz muffle and a proven mechanism suitable for any type of ceramics. SKU: AF100-AFPRESS Category: Metals casting Description Furnaces of last generation with quartz muffle and a proven ...

Temperature range: max 1200.0 °C

Vacuum furnace Furnaces of last generation with quartz muffle and a proven mechanism suitable for any type of ceramics. SKU: AF100-AFPRESS Category: Metals casting Description Furnaces of last generation with quartz muffle and a proven ...

Temperature range: max 1200.0 °C

Vacuum furnace Furnaces of last generation with quartz muffle and a proven mechanism suitable for any type of ceramics. SKU: AF100-AFPRESS Category: Metals casting Description Furnaces of last generation with quartz muffle and a proven ...

Temperature range: 250 °C - 1,200 °C

Vario Press 300e was born as a press furnace, but it is also an excellent firing furnace for stratified and pressed ceramics. What makes it unique is the patented interface for working with lithium disilicate ceramics, a material that ...

Temperature range: 250 °C - 1,200 °C

VARIO 300e ZR is a multifunction furnace with special programs for zirconia and lithium disilicate. The firing of dental ceramics on zirconium oxide involves a high risk of micro-fractures after cooling, Vario 300e ZR solves this problem ...

Temperature range: 0 °C - 1,650 °C

More efficient thanks to its high capacity. Thanks to the size of the heating chamber, you can sinter your works including up to 80 elements at once. With 4 high-quality resistors (MoSi2), it offers the freedom of sintering your works ...

Temperature range: 0 °C - 1,650 °C

Built for the best price/performance. With its compact design, it will be an indispensable member of small and medium-sized laboratories. With its 100 mm diameter crucible and resistances (MoSi2) you will get maximum efficiency. 4x ...

Temperature range: 80 °C - 290 °C

S-U-AQUEX Pre-Heating Unit Item No. 11250 This heating-unit is appropriate for the drying and pre-heating of up to 6 duplicate models. The temperature can be regulated continuously inbetween 176°F (80°C) and 1076°F (290°C). A special ...

Temperature range: 0 °C - 1,600 °C

Technical info Max. temperature: 1600°C Time to reach Max. temp: 30 min. Ramp rate: Max. 56°C/min Cooling time: 30-180 min Voltage Range: 220-240 V ~ 50 Hz Current: 15 A Power: 3300 Watts Height: 55 cm Width: 34 cm Depth: 43 cm Weight: ...