- Laboratory >
- Laboratory infrastructure >
- Exhaust fume hood
Exhaust fume hoods
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Face velocity: 0.3 m/s - 0.8 m/s
Power: 220 W
Length: 700 mm
... of users and prevent contaminants in the experiment from spreading to the laboratory, the fume hood is used in the vicinity of pollution sources. Fume Hood FH700:Negative pressure ...
Face velocity: 0.3 m/s - 0.8 m/s
Power: 125, 500 W
... plate material, surface electrostatic spraying, with good finish; 3, The platform panel of the operation area of the fume hood is made of solid physical and chemical plate, which is resistant to acid ...
Depth: 830 mm
Height: 1,575 mm
... retardant exhaust HEPA filter, externalized outlets and service valves, and dual-interlocked exhaust flow via a mechanical switch and velocity pressure flow grid. Continuous monitoring through a touch ...
NuAire Laboratory Equipment
Depth: 778, 777 mm
Height: 2,350 mm
... air down through the air slots in the work surface to contain allergens. The air is then drawn past an exhaust pre-filter and pushed out an exhaust HEPA filter on the bottom of the unit. The Aeromax ...
NuAire Laboratory Equipment
Depth: 780 mm
Height: 2,289 mm
... there, the exhaust impeller at the bottom of the “piston” pulls the downflow air through the slots in the work surface to provide allergen containment. It continues to suck all the air past an exhaust ...
NuAire Laboratory Equipment
Depth: 700 mm
Height: 1,026 mm
Fully certified to BS EN 14175, these high performing industrial fume cupboards offer exceptional airflow characteristics and in a range of standard or custom sizes. SAFETY STANDARD CONFORMITY Tested and Approved ...
Monmouth Scientific
Depth: 700 mm
Height: 1,026 mm
Fully certified to BS EN 14175, these high performing industrial fume cupboards offer exceptional airflow characteristics and in a range of standard or custom sizes. SAFETY STANDARD CONFORMITY Tested and Approved ...
Monmouth Scientific
Depth: 700 mm
Height: 1,026 mm
Fully certified to BS EN 14175, these high performing industrial fume cupboards offer exceptional airflow characteristics and in a range of standard or custom sizes. SAFETY STANDARD CONFORMITY Tested and Approved ...
Monmouth Scientific
Depth: 600 mm
Height: 1,460 mm
Pharmaceutical exhausts according to DIN 12924 Part 4: 2012 Function / construction: Safe handling of chemicals, protection from hazardous vapours and potentially explosive atmospheres Easily mounted on a table top Robust ...
asecos
Depth: 420 mm
Height: 460 mm
In the same design as the work preparation box AV 1000, Zubler offers a monomer box that is suitable for exhausting toxic fumes that arise while mixing plastic monomer. The vapors in the box are pulled downward, and will ...
Depth: 120 mm
Height: 180 mm
... stainless steel (material no. 1.4301 – ANSI 304). Available in different dimensions. TECHNICAL DATA Exhaust air capacity: min. 150 m³/h Exhaust duct diameter: 100 mm
KUGEL medical GmbH & Co. KG
Depth: 600 mm
Height: 700 mm
... unit is to be connected to the exhaust system which needs to be provided by the customer. Left and right a glass sealing made of ESG security glass Very sturdy, perforated working plate made of stainless steel Exhaust ...
KUGEL medical GmbH & Co. KG
Depth: 120 mm
Height: 180 mm
... stainless steel (material no. 1.4301 – ANSI 304). Available in different dimensions. TECHNICAL DATA Exhaust air capacity:min. 200 m³/h Exhaust duct diameter:100 mm
KUGEL medical GmbH & Co. KG
Height: 940 mm
The portable tabletop exhaust hood EBS is universally usable. It is corrosion and acid resistant. The maximum extraction capacity is 1 cubic meter per minute and is continuously adjustable.
Face velocity: 0.4 m/s - 0.6 m/s
Power: 136, 460 W
... Max (ADC) Ductless Fume Hood utilizes a carbon filtration system to remove toxic chemical fumes and recycle clean air back to the laboratory. This airflow principle provides operator ...
Our extraction hoods guarantee a smooth working process and good indoor climate in combination with furnaces and polishing devices. Thanks to the steplessly adjustable extraction, our extraction hoods ...
Length: 2,165, 1,565, 1,265, 2,465 mm
Depth: 1,027 mm
Height: 2,300 mm
ASEM® total exhaust fume hoods guarantee maximum operator protection when handling toxic products, satisfying all safety standards requirements. Available in various sizes (120, 150, 180, 210, 240 cm) ...
Length: 1,500, 1,800, 1,200 mm
Depth: 877 mm
Height: 2,260 mm
ASEM® total exhaust fume hoods guarantee maximum operator protection when handling toxic products, satisfying all safety standards requirements. Available in various sizes (120, 150, 180, 210, 240 cm) ...
Length: 1,779, 1,179, 2,379, 1,479, 2,079 mm
Depth: 1,115 mm
Height: 2,500 mm
Construction Self-supporting hood thanks to its full-height sides Sashes 2 - With safety glass - 3 windows, horizontally openable Side walls Blind ASEM® total exhaust fume hoods ...
Length: 957, 1,262, 1,567, 1,872 mm
Depth: 765 mm
Height: 1,370 mm
The BCS is an EXHAUST FUME HOOD made of COPLAST (expanded PVC) The BCS ensures the protection of the manipulator and his environment thanks to a depression of the working volume towards the outside. Designed ...
Length: 800, 1,220, 1,500 mm
Depth: 590 mm
Height: 275, 650 mm
... Custom-made COPLAST Structure The T is designed to protect the users and their surrounding environment by means of an exhaust system. Made of non-particle-generating materials, it can be installed directly in ...
... two absolute ULPA filters. The clean air is now totally exhausted outside the building through a sealed pipe system. The exhaust air quantity has to be reintegrated in the ambient in order to avoid a dépréssion that ...
Biohazard vertical laminar flow hood, class II A (if provided with the outlet exaust adapter fitting, Class A/B3). The hood is TÜV certified, according to UNI EN 12469. The cabinet has been projected ...
Sterile Laminar flow hood in Class I not Biohazard designed for the protection of both operator and product. The flow activa hood is suitable for the handling of low biological risk pathogens (cat 1 e ...
The all-stainless steel GLOBO Series hoods come in two versions: closed with sliding glass door or wall mounted. Both models are fitted with a low-noise and powerful 801 m3/h induction extractor fan and LED lighting. The ...
With an exhaustion system, the Biochamber was exclusively designed for work done with the Microblaster, and assures more cleanness, providing efficiency, safety and functionality during the blasting process.
Sandblasting enclosure for use with Micro sandblaster. The MHC 215 offers a wide view from different angles with a modern dome design. Its blower allows particles to be pressed to the bottom of the bell (removable for easy cleaning). ...
Face velocity: 0.3 m/s - 0.5 m/s
Power: 46 W
Depth: 960 mm
Standard equipment for fume hoods: - structure entirely made of galvanized steel without the use of wood-based materials - worktop at a height of 900mm made of monolithic ceramics with a raised rim ...
POL-EKO APARATURA sp.j.
Depth: 61 mm
Height: 66.3 mm
... potentially hazardous fumes and dust using Scienceware® Clear View Fume Hoods. They have a sleek modern style that is functional and aesthetically pleasing. Perfect for laboratory, classroom ...
BEL-ART - SCIENCEWARE
Length: 1,020 mm
Depth: 621 mm
Height: 1,920 mm
Fume hood SHV-1,0-“Laminar-S.” is designed for use in laboratories providing operator’s protection when working with chemically harmful materials and for their effective removal. Application of the ...
LAMSYSTEMS
Face velocity: 0.4 m/s - 0.6 m/s
Power: 250 W
Length: 750, 900, 1,200, 1,500, 1,800 mm
Topair’s Polypropylene Ductless Fume Hood – PRO with EN and ASHRAE certification provides a safe work environment for lab staff working with acids and harsh chemicals. The hood includes ...
TopAir Systems, Inc.
Power: 400, 1,200 W
Depth: 355 mm
Height: 682 mm
Protects the operator's health and prevents the laser room and lens from contamination Processing materials with a laser produces poisonous dusts and gas pollutants. Extraction protects the operator's health and prevents the laser room ...
... entire vacuum-effected area. The exhaust unit has to be connected to a side-mounted exhaust system. Half open with illumination Left and right side with sloped glass sealing made of ESG safety glass Connection ...
Depth: 711 mm
Height: 1,194 mm
... Description Total Exhaust ducted fume hoods use horizontal and vertical airflow across the work surface to provide personnel protection from hazardous agents and toxic chemicals. These hoods ...
... competitive containment performance and energy efficiency, the NovaGuard™ operates with exhaust volumes significantly lower than conventional hoods. NovaGuard™ hoods have passed standard ...
Mott Manufacturing
Depth: 800 mm
Height: 1,510 mm
- Glass height transducer with flowmeter and ventilation adjustment - Automatic management of ventilation speed, functions delay and grossing basins rinsing - Foot-pedal for water control valve - Arrangement for DIGIpath ULTRA - Lighting ...
Depth: 23.5 in
Height: 20 in
Bench-top fume hood for DigiPREP Jr. and DigiPREP MS digestion blocks. Replacement air is drawn through the dual HEPA kits offering cleaner ambient air. An adjustable speed blower unit (sold separately, ...
Your suggestions for improvement:
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining