Golden Retaining screw for tapped screw-retained elements (Screw head: Ø 2,2 mm) 0215 For prosthesis: ≤ 25 N.cm maximum (Screw head: Ø 2,5 mm)
Titanium - To screw prosthesis components to all abutments; it is screwed to 20 Ncm using the 1.27 hexagonal driver available in two lengths.
... anodized - To screw the provisional bridge to titanium hubs. To tight them, you should use dynamometric ratchet (CRD) and hexagonal driver 1,5 mm (40052901) with a torque of 30 Ncm. To simplify the manual screwing and ...
Titanium NOTE - These screws enable customized structures, such as bars to be cast or to be milled with CAD/CAM systems, to be screwed to specific implants.
These parts are solely intended for the incisive-canine sector and for single-unit cement-retained prosthesis only.
Référence : VTI14 definitive tightening screw for conical abutment
... Bone Level and Soft Tissue Level ImplantsStraumann® abutments are designed to achieve the best possible performance to the implant-abutment connection
fastening screw between abutment and connector (both straight and angled) fastening screw between connector and implant
... for the correct orientation of the connection. It is supplied without connection screw. A connection screw must be purchased for fixing the final abutment onto the implant.
... angled Multi-unit abutments and certain CAD/CAM abutments. Final torque: 30 Ncm with .050” (1.25mm) Hex Driver or Unigrip™ screw driver. Titanium alloy. Included with abutment but can also be ordered separately.
Inclusive® Titanium Screws and Inclusive® Guide Pins are threaded fasteners used to attach implant prosthetic components to dental implant fixtures or implant analogs ...
... Prepable Abutment, Laboratory Screw and Neoss" Crystaloc”' AbutmentScrewNote: The Wide Emergence Abutment is delivered steri/e and includes abutment, Laboratory Screw,Neoss® Crystaloc"Abutment Screw, ...
Hex Screw/TH20-140-040-C20Code: B100281Family: ACCESORY SCREWSub-family: HEXAGONALTrade mark: SCREW
All our abutments are supplied together with the relevant screw. The titanium Abutment should be tightened to 30-35 Ncm
Made from Titanium ASTM F136 grade 5 non rotational design, includes the fixation screw available for implants Ø 3,25 - 3,75 - 4,00 - 4,25 - 5,00 mm.
1.104Length, mm3Closing screw and gingiva former
Cover ScrewUse Handscrewdriver 1.2mm(ZD04.002) for placement;Do not exceed 10 N.cm torque.
Screws for definitive use. Made from medical grade 5 ELI Titanium Integrity and soundness guaranteed by stress tests of up to 150% of their nominal torques.Their designs ensure a perfect fit with both the standard accessories ...