- Medical Technical Facilities >
- Hospital infrastructure >
- Manifold
Manifolds
Hybrid Manifold Cabinet & Controller (Multi-Voltage) Digital Manifold Cabinet Only (Multi-Voltage) Space Saver Header Bars Complete Header Bar Kits with Dual Connections Oxygen Nitrous Oxide Nitrogen Air Carbon ...
MEDGAS BANK Automatic changeover cylinders are designed for healthcare facilities wishing continuously supply oxygen, nitrous oxide, compressed air, nitrogen or carbon dioxide, their distribution of medical gases from cylinders or bundles. The ...
• For EMS and mass casualty situations where multiple patients require oxygen simultaneously • Consistent pressure • Manufactured according to CE requirements, compliant to EN 13220
Genstar Technologies Company
... ensures the manifold maintains its reliability while reducing the potential for leaks, avoiding wasteful gas losses. The NEMA 4 enclosure and environmental testing provides the ability for outdoor installations. Our LifeLine® ...
BeaconMedaes
Somni’s Bain Non-Rebreathing manifold is a perfect solution for those looking to add safety and versatility to their Non-Rebreathing set up. Incorporating a fully functioning pop off valve as well as a standard manometer ...
Somni Scientific
... multiple plate positions quickly and easily with the Stainless Steel Manifolds for Microtest Plates. Constructed of top-quality autoclavable stainless steel and PTFE material, the manifolds can be used ...
CM280 - CM380 is a compact supply board. It is ideally suited for pure and corrosive gases for high purity applications dedicated to the supply of gas to analyzers and to the creation of controlled atmosphere in laboratories, control ...
ROTAREX MEDITEC
... Display readings for primary and secondary deward cylinder headers in real time. • High and Low pressure Display readings for manifold final pressure delivery in real time. • Pressure units. • Alarm signais. Signals ...
Arigmed
The AUTOMATIC CHANGEOVER MANIFOLD CONTROL SYSTEM C-LH-HTM complies to HTM 2022 HTM 02-01, ISO 7396-1 and ISO 10524-2 standards. The AUTOMATIC CHANGEOVER MANIFOLD CONTROL SYSTEM C-LH-HTM is able to ...
DELTA P
... Products provide a comprehensive range of Manifold systems and accessories that are all hand made at its factory in Greater Manchester. CALISTRA conforms to the same exacting standards as all of our other manifolds ...
Millennium Medical Products Ltd.
This system is a range of manifolds used in healthcare facilities to provide a safe and continuous supply of medical gas to the piping network. Designed to be connected to 2 ramps of high pressure cylinders, this manifold ...
Swabable Needle Free Luer Activated Multi-Port Manifold, Clear Polycarbonate Extended DescriptionA Clear Polycarbonate bodied swabable multi-port manifold with 6 needle free injection sites and a flow ...
AUTOMATIC CHANGE-OVER UNIT WITH MANUAL RESET Maximal inlet pressure (bar) : - 200 Outlet pressure (bar) : - 0 - 10 Standard discharge (nm3/h) : - 44 Maximum discharge (nm3/h) : - Gas compatibility : - Medical gases
CAHOUET S.A.
Dual E-tank manifold for Supera A frame chassis. Includes: all mounting hardware and green oxygen hose
Rigid polycarbonate material to withstand high pressures. Releases pressure in high accuracy to ensure patient safety. 15mm female gas inlet connector. 22mm female connector to connect to the humidifier chamber. 15mm port for testing ...
... more information regarding compatiblity and processing with a vacuum manifold. Composition - The EZ-Vac Vacuum Manifold consist of a linear, low-density polyethylene (LLDPE) manifold ...
... supply. The manifold shall be supplied fully assembled and tested. Automatic Manifolds provide a continuous supply of gas from two banks of cylinders by automatically changing to the standby bank when ...
Schönn Medizintechnik GmbH
The Powerex FirstCall™ fully-automatic medical gas manifolds deliver an uninterrupted supply of medical gas to a facility. The manifold is cleaned, tested, and prepared for the intended medical gas service. ...
... cylinder bundles) it will be possible to install more manifolds connecting them to each other with gas specifi c pigtails. The connection between cylinder and manifold and between main panel board and ...
The AMP200 is a high performance Automatic Manifold System manufactured to comply fully with current HTM02-01 standards. It is designed to provide a duty and standby gas supply at a constantly regulated pressure via two ...
MIM Medical
... flow capacity for hospitals or any other medical gas installation Easy-to-read LED lights to indicate the status of the manifold Gas continues to flow if primary power is interrupted Accepts 115 or 220 VAC Complies ...
Description Our dynamic rotary manifolds ensure a limited footprint and increased ease of use. With a fixed part that allows for multiple inlets/outlets and a rotary part which creates various interconnections, many ...
MEDICINAL GAS DEPRESSING CENTRAL PEGISDAN is a decompressor medical center designed and manufactured by PEGISDAN at its headquarters in Madrid (Spain) according to UNE-EN-ISO 7396-1 / 10524 and NFPA-99-2015. Different models We have ...
... sciences sectors. The concept behind the manifold gives multiple modules maximum configuration versatility, combining miniature solenoid on-off valves and proportional control valves. Each single manifold ...
... status and provides alarms when pressure limits are exceeded. The manual manifold requires the operator to manually switch between empty and reserve tanks. The electronic manifold detects empty tanks ...
Your suggestions for improvement:
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining