Medical bioindicators

... indicator can only be used for chemical monitoring of pressure steam sterilization and cannot be used for dry heat, chemical gas and other low temperature sterilization monitoring.

... indicator can only be used for chemical indication of pressure steam sterilization and cannot be used for dry heat, chemical gas and other low temperature sterilization monitoring.

▪ Accurate simulation and indication ▪ Patented B-D indicator sheet for easy judgment ▪ Self-adhesive B-D sheet and label design for easy archiving ▪ Eco-friendly lead-free formula It is suitable for testing the air removal effects ...

STERRAD VELOCITY™ Biological Indicator System 15-minute biological indicator results and seamless connectivity with STERRAD™ Systems. Featuring touchscreen technology and a smart BI, it is also fully ...

Cfull biological indicator for dry heat sterilization Biological indicator for dry heat sterilization provide a direct measure of the lethality of the process. So using BIs to routinely monitor sterilizers ...

Cfull biological indicator for steam sterilization Biological indicator for steam sterilization are test systems containing viable microorganisms providing a defined resistance to a specific sterilization ...

Cfull biological indicator testing Biological indicator testing provides information on whether necessary conditions were met to kill a specified number of microorganisms for a given sterilization ...

Apex Biological Indicator products are designed specifically for the pharmaceutical, food and medical device industries utilizing H2O2 vapor sterilization. The stainless steel carrier material is designed ...

EZTest is a self-contained biological indicator for monitoring steam / flash steam, ethylene oxide, hydrogen peroxide, or propylene oxide sterilization. EZTest contains bacterial spores on a filter-paper carrier packaged ...

Spore Strips Biological Indicator Mesa Labs offers a complete line of spore strips for sterility testing in various sterilization environments for both Healthcare and Industrial applications. Mesa’s products are manufactured ...

Famos process indicators only indicates that the pack have been into the sterilization cycle, but doesn´t measure the parameters of the sterilizer to show if the sterilization was successful. Process indicators should be on the outside ...

KMNPack Biological Indicator Rapid Reader adopts spectrum analysis technology to monitor the fluorescence changes of the Bacillus Stearothermophilus with special enzyme to rapidly judge whether there is surviving spores. The ...

Colour change: Magenta to yellow Calibrated for VHP sterilization processes Non-toxic Clear colour change Easy to interpret - easy to record Lead free Ensure that your VHP sterilization process was effective. The Valisafe VHP ...

The Essential TST indicator is used to check the conditions for sterility are met for every non-vacuum cycle and is validated for use in all Little Sister N type non-vacuum autoclaves. Calibrated to 3.5 mins. at 134°C Monitors critical ...

... affordable means to ensure compliance with the recommended sterilization practices of the Association for the Advancement of Medical Instrumentation (AAMI). HOW VERIFY VALUELINE INDICATORS WORK STERIS Verify Valueline ...

Made from coated Tyvek® Sealing to thermoformed trays Customized sizes and specifications supplied upon request Lift Stickers Features Made from coated Tyvek® Stronger self-adhesives Customized sizes and specifications ...

Autoclave Tapes provide a safe solution for closing of all kind of crepe paper and linen used for wrapping. If closed wraps are sterilized in autoclaves conforming EN 285, the clear and distinctive colour change will indicate if wrapped ...

FreezeSafe, Tempasure and ColdMark are descending, irreversible temperature indicators that clearly and easily show that the reaction threshold has been exceeded. These indicators, ideal for monitoring drugs and vaccines, have the following ...

With the ShockWatch® RFID (radio-frequency identification) tag, it’s nearly impossible for items damaged by impacts to get past the supply chain. Simply choose the appropriate impact threshold and affix the ShockWatch RFID tag. Then, ...

Biological indicator for automatic reprocessing procedures of flexible endoscopes. Please note: cfu > 109 SIMICON EF is a biological indicator, which is designed for the validation and routine monitoring of cleaning ...

A disposable test pack for testing air removal and steam penetration efficacy of the vacuum sterilizers. Clear contrast between the original and end colors, easy interpretation, lead free reagents, non-reversible reaction. For both 134 ...

Bowie-Dick test packs are specifically designed for daily monitoring of vacuum-pump-assisted steam sterilizers and pre-vacuum cycles. It detects leaks, inadequate steam penetration, air bubbles and malfunction or failure in the vacuum-pump. MAIN ...

Sterdoc Steam Sterilization Tape can be used in 121°C gravity sterilizers or 132°-134°C pre-vacuum sterilizers. Tape turns dark brown/black after exposure to steam or chemical vapor sterilization conditions, thus providing identification ...

Self-contained biological indicator developed for monitoring a sterilization by saturated steam process. With Geobacillus stearothermophilus spores. Easy interpretation of results. When the sterilization is successful ...

Crosstex SporView® Self-Contained Biological Indicators (SCBIs) for monitoring steam sterilization consist of a thermoplastic vial and a brown cap, a crushable glass ampoule with Trypticase® Soy Broth (TSB) modified with ...

Test system according to EN ISO 11140-1 (type 2) MELAcontrol Bowie & Dick Test is a test system according to EN ISO 11140-1 (type 2) for routine control of the steam penetration of your autoclave. The practical test package simulates ...

Indicator according to EN ISO 11140-1 Indicator according to EN ISO 11140-1 for checking the sterilisation conditions (steam, temperature and time). The indicator can be added to packaged instruments (e.g. in MELAfol, MELAstore) or ...

... and regulations: MDD 93/42; UNI CEI EN ISO 14971: 2009, " Application of the risk management of medical devices " EN 11140-1: 2005 " medical products sterilization" - chemical Indicators UNI ...

... The modification of the ink color allows to identify quickly the packages which were already sterilized. CONFORMITY: Medical devices EC.PRION don't contain substance derived of human blood, directive 2007 / 47 / ...

Self-contained Biological Indicator for Steam sterilization processes. Monitoring vacuum-assisted and gravity air-displacement Steam Sterilization processes at 121-135 °C. Geobacillus stearothermophilus (ATCC 7953) 10^5 ...

Self-contained Biological Indicator for Steam sterilization processes. Monitoring vacuum-assisted and gravity air-displacement Steam Sterilization processes at 121-135 °C. Geobacillus stearothermophilus (ATCC 7953) 10^5 ...

Complete range of tests for the control of the sterilization process. Bowie & Dick Test, Helix Test and chemical indicators, check the correct penetration of the steam inside the sterilization load, thus ensuring an adequate operating ...

Integrators are a Type 5 chemical indicator designed to react to all critical variables in the sterilization cycle: time, temperature and presence of steam. 100 strips/pouch.