Storage racks

... The entire system is made of powder-coated aluminum; therefore, it can be cleaned with a variety of liquids 2. The Hygieia rack system is a completely sealed system, there are no open holes within the structure of ...

... The entire system is made of powder-coated aluminum; therefore, it can be cleaned with a variety of liquids 2. The Hygieia rack system is a completely sealed system, there are no open holes within the structure of ...

... RACK DIMENSIONS Two orientations (E, U), and multiple basket depths configurations. E type: 66.6 cm (26.2”) x 45.1cm (17.6”) x 197.5cm (77.6”) U type: 46.6cm (18.3”) x 65.1cm (25.6”) x 197.5cm (77.6”) CATEGORY ...

Four-sided access increases availability of Sanitizer and PPE up to 4x in high traffic areas. Can be reconfigured in one, two, or three-side configurations. Shelves provide flexibility to station back-up supplies, other PPE, hold a waste ...

... burr-free stainless steel wire. Shoe holder for attaching to wall hook racks or hook trolleys, consisting of a wire frame and closed wire loops welded to it, for suspended storage of two shoes each. Capacity: ...

MOSYS Space: high density storage system The same components as MOSYS can be used to make high-density racks. Mobile shelves slide on their own wheels and guide tubes, while two fixed shelves represent ...

... clean and orderly storage of bags during sample preparation. Available for bag sizes: 80 mL / 100 mL / 400 mL / 2000 mL / 3500 mL Autoclavable and stackable Clean and organized storage BagRack allows ...

The BagRack Slide enables the organized, hygienic and fast storage of bags by sliding them to the side. It is ideal for sequential pipetting in addition to BagFilter Pipet & Roll bags. BagRack Slide is specifically suited ...

wall mounted shelf made of stainless steel 1.4301 equipped with four shelves, ending in a safety bar equipped with drip tray under the lower shelf

made of stainless steel 1.4301 self-standing storage rack, equipped with four shelves, ending in a safety bar shelves on 140 mm legs with level adjustment 1000x400x1800 600x400x1800

made of stainless steel 1.4301 with eight hooks option: different quantity of hooks on request

The simplest storage solution for 10 endoscopes Holding up to 10 trays in a small space, the Soluscope Rack temporarily stores clean endoscopes or specific endoscopes that are not frequently used. With ...

Super InterMetro - Resin-coated chrome finish - 1 coat hanger tube, STAINLESS STEEL - 2 wire shelves - 4 swivel castors, 2 with brakes Diameter: 150 mm - Dimensions: approx. 1067 x 533 x 1765 mm (W x D x H) - (without coat hangers)

System Super NN, chrome - 1 coat hanger tube, STAINLESS STEEL - 2 wire shelves - 4 swivel castors, 2 with brakes Diameter: 150 mm - Dimensions: approx. 762 x 533 x 1795 mm (W x D x H) - (without coat hangers)

System Super NN, chrome - 1 coat hanger tube, STAINLESS STEEL - 2 wire shelves - 4 swivel castors, 2 with brakes Diameter: 150 mm - Dimensions: approx. 1829 x 533 x 1795 mm (W x D x H) - (without coat hangers)

Made in the UK by Neocare using EU certified austenitic 316-grade stainless steel, the Hook Up Storage Racks are designed specifically for the storage and organisation of RAPIDAER™ Endoscope ...

The MEDIVATORS ADVANTAGE Hookup Rack stores hookup blocks used in the ADVANTAGE® Endoscope Reprocessor. The graduated design keeps hookup blocks organized for quick retrieval and easier tube management. The hanging style ...

The MEDIVATORS Hookup Rack is designed for DSD & CER Automated Reprocessor hookups, flushing aid tubing for use with SCOPE BUDDY® Flushing Aids and tubing sets compatible with VERISCAN® Leak Testers. This convenient storage ...

... fix on the wall. Compatible with safety boots, capacity of 20 pairs. Supplied with screws and plugs. Weight 16 kg Storage capacity 20 pair Dimension 960x1768x312mm Packaging 1

... -column double-side structure and stores 20pcs 100mm height medicine baskets. It is also equipped with 2pcs storage partitions for easy storage of large items. The partitions are welded from high-quality ...

... convenient for installing a variety of accessory brackets, such as catheter wire brackets, endoscopic brackets, etc.; 6. The storage rack is equipped with 7pcs 100mm height medicine baskets and 2pcs ...

... convenient for installing a variety of accessory brackets, such as catheter wire brackets, endoscopic brackets, etc.; 6. The storage rack is equipped with 14pcs 100mm height medicine baskets and 4pcs ...

Hose and abdominal cloth rack Made of stainless steel, clean, jointless finish, with 11 welded-in hooks, arranged offset, holds anaesthesia hoses and abdominal cloths. /Order No. 542 224/ Dimensions: 585 x 94 x ...

5 Lines Hanging System Total 100 Sponches Tray For Liquid Waste

Three-level stainless steel rack, non-disassembled. Complete with polypropylene cages for keeping laboratory mice and guinea pigs. Cage dimensions 930x615x245. Cage equipment: 500ml polypropylene drinker stainless steel feeder.

5 shelves stainless steel rack The rack of five shelves is made from stainless steel tubes 20*20*1.5mm The rack is on rubber 75mm wheels Overall dimensions: 1700х410х1550(1720) mm with wheels

Five shelves rack made from stainless steel for laboratory cages storing Frame: stainless steel tube (AISI 304), 40х20х1,5 mm. Shelves: stainless steel AISI 304 1 mm Distance between shelves: 400 mm. The rack ...

The probe quiver is a system for storing medical equipment. This equipment allows the storage and provision of medical probes as is: urinary bladder probes, intubation probes, simple probes, etc. Easily access medical ...

... patient records are not readily disinfectable, in the operating theatre it is advisable to place them in a dedicated vertical rack.

18/10 stainless steel. Overall dim.: 575 x 350 x H.145 mm. Compatible with STÉRICADDIE type 1/1, 2/3 and 1/2 bins. Space between bottom wires: 30 mm. Unit weight: 2.3 kg. Permissible load: 40 kg.

... stainless steel racks are characterized by a long-life cycle, practical design and how easy they are to roll. The racks are available either as universal height-adjustable racks or for ...

Size：1500*400*1900MM 1. Full welding and spot welding combined with a new welding process, with304 special welding wire, so that the 2. Fangge products can not be welded, the welding surface is smooth and uniform, beautiful and ...

... place baskets, containers, or packs for sterilization, storage, and transportation of sterilized and non-sterilized items and instruments in CSSD departments, hospital, laboratories, and storage rooms. ...

... place baskets, containers, or packs for sterilization, storage, and transportation of sterilized and non-sterilized items and instruments in CSSD departments, hospital, laboratories, and storage rooms. ...

... place baskets, containers, or packs for sterilization, storage, and transportation of sterilized and non-sterilized items and instruments in CSSD departments, hospital, laboratories, and storage rooms. ...

Storage Trolley and Retrieval Trolley are designed for hygienic storage of laundry, treatment equipment, consumables, durable equipment and transport to different units within the clinic when required. • ...

Static Type A system with 2 units for baskets and 1 unit for shelves H 2020 x W 1815 x D 665 mm

Static Type B system with 2 units for baskets and 1 unit for shelves H 2020 x W 2610 x D 465 mm

Mobile Type A system with 2 units for trays and baskets H 2120 x W 930 x D 665 m

The Remeda shelf rack is used together with a trolley or automatic loader to carry the goods through the sterilizers. The shelf rack allows goods to be pre-loaded at the packing table and is manufactured ...

The shelf rack´s shelves can slide out which facilitate easy lifting of the containers in its handles from the correct lifting position. The goods are put on the shelf rack after packing and the shelf ...

The Remeda shelf rack is used together with a trolley or automatic loader to carry the goods through the sterilizers. The shelf rack allows goods to be pre-loaded at the packing table and is manufactured ...

Wall-mounted stirrup rack conveniently stores two surgical stirrups, two boot liners, clamps and other accessories. Instantly improves storage in the OR suite while remaining easily accessible for OR ...

Wall-mounted stirrup rack conveniently stores two surgical stirrups, two boot liners, clamps and other accessories. Instantly improves storage in the OR suite while remaining easily accessible for OR ...

Operating theatre clog racks, made of Stainless Steel 18/10 AISI 304 (X5CrNi1810), wall mounted CLOG RACKS FOR OPERATING THEATRE Clog racks for operating theatre art features: Made ...

... ISO modular racks differentiate themselves from other racks through their high flexibility and modularity. They are easy to install, bring structure into the storage of products and ...

RKS systems made entirely of stainless steel grade 0H18N9 Racks are slats or free-standing units with hooks for hanging baskets and shelves. Total dimensions: 550 x 450 x 1800 mm [L x S x H]

RKS systems made entirely of stainless steel grade 0H18N9 Racks are slats or free-standing units with hooks for hanging baskets and shelves. Total dimensions: 550 x 750 x 1800 mm [L x S x H]

Racks of RKS-7 system made entirely of stainless steel grade 0H18N9, fitted with 125 mm casters, two with blocking mechanism Equipment of racks are baskets and shelves Total dimensions: 550 x 750 ...