Pressure leak tester LEAKAGE:MASTER
for endoscopesbenchtopautomatic

pressure leak tester
pressure leak tester
pressure leak tester
Add to favorites
Compare this product
 

Characteristics

Type
pressure
Applications
for endoscopes
Configuration
benchtop
Other characteristics
automatic, digital

Description

Electronical Leakagetester Power supply: - 230 V / 50 Hz Fuses: - 2 x 1,25 A Supervision mark: - VDE 0750 (part 1/05.02) Width: - 280 mm Height: - 150 mm Depth: - 300 mm The LEAKAGE:MASTER does not only serve for the examination of the endoscope on tightness, but finds also use already from prepurifying up to the end of the disinfection procedure and protects your endoscope against liquid break-down by permanent, electronically controlled counter-pressure. During the manual precleaning and disinfection the Leakage:Masters avoids an ingress of water into the endoscope by permanent air feed charge via the ETOvalve. The Leakage: Master is working with a counterpressure of approx. 200 mbar. Any possible leak is indicated visual and optical. The counterpressure will be sustained until the endoscope will be taken out of the fluid. Therefore the Leakage: Master prevent high expenses for endoscope repair. Suitable for all common, flexible endoscopes Exact readout by display Detects micro-perforations in less than 2 minutes Optical and acoustical alarm signal Leakage surveillance during the whole endoscope reprocessing

Catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.