magnetic laboratory stirrer / analog / bench-top / heating
PRO Scientific Inc.
Max.: 1,600 rpm (10,053 rad.min-1)
Min.: 60 rpm (377 rad.min-1)
Max.: 400 °C (752 °F)
Min.: 5 °C (41 °F)
Ceramic hotplate stirrer delivers accurate & repeatable magnetic stirring results
LED temperature display with range of ambient +5° to 500°C
Maximum volume of 2.5L and RPM speed range of 60 to 1600
Hot top indicator for additional safety
Includes overshoot and stir protections
HPS-7C Hotplate Stirrer delivers accurate, repeatable magnetic stirring results. A spill-resistant housing channels fluids away from the internal components for long service life, and easy-to-use controls allow adjustments to be dialed in quickly.
Micro-processor control - Regulates both heating and stirring functions. Samples are heated to temperature quickly and accurately. Speed is precisely controlled, and provides consistent stirring throughout the entire range. Ramping feature slowly increases speed to avoid splashing, improves magnetic coupling and provides excellent low speed control.
Ceramic top plate materials - Ceramic tops feature a chemical resistant, reflective white top plate surface that's easy to clean.
LED display - Shows set point temperature. Display is easy-to-read and provides repeatable and accurate results every time.
Hot top indicator - For additional safety, hot symbol warning light is illuminated when unit is heated above 40°C. Remains on until unit cools below 40°C, even when heater is turned off.
Stir protection - If stirrer motor stops or fails, unit will automatically shut down heater (for stirring models).
Overshoot protection - If unit exceeds set temperature by 10°C unit will automatically shut down.
Recall last temp - Built-in memory allows users to recall last set temperature even when unit has been turned off.