Operating microscope camera adapter S10 series

“Integrated” Combination adapter with Built-in Beam splitter, Camera Adapter and Yellow Filter designed for our TAKAGI products. Features C-mount ring The C-mount adapter is provided as standard to be available for all C-mount cameras, and a CCD camera incorporating a 1/3” chip provides the ideal angle of view of the monitor. A specialized relay lens allows the adapter to be fitted to Nikon digital camera COOLPIX995. Beam splitter IN/OUT knob When the knob is turned to IN, the image can be viewed through the eyepiece, and the image in the left eye can also be viewed on the monitor connected to the camera. When turned to OUT, the image can only be viewed through the eyepiece, and not on the monitor. CCD camera flange back adjustment When a CCD camera is installed, the camera focus adjustment can easily be made with a set screw, which allows ready focusing of the image. CCD camera centering adjustment The centering adjustment of the optical axis can easily be made with three set screws on the periphery of the adapter, which allows alignment correction of the image on the monitor due to inclination of the CCD chip. Distance from the eyepieces to the examinee The beam splitter, camera adapter and yellow filter are integrated into a compact housing to minimize the distance between the eyepieces and the examinee. This has resolved the problem of reduced operability when multiple adapter are fitted. Camera image of Focus depth aperture Diaphragm knob Push/pull the lever to change the focus depth of the image in the camera.