Laboratory test tube Nalgene™ Oak Ridge

PTFEcentrifugewith screw cap

Withstand temperatures from -100° to +150°C (-148° to +302°F) Leakproof† closures prevent material loss under ordinary use for most spins <10,000 × g When equipped with a Nalgene sealing cap assemblies (sold separately), 30mL and 50mL tubes can be spun up to 50,000 x g Must be filled to at least 100% total capacity for proper performance. Autoclavable/Biohazard/Leakproof† when used with supplied Nalgene closure /PTFE FEP Ordering Information: Optional sealing cap assemblies available — DS3131-0020 (for 30mL tube) and DS3131-0024 (for 50mL tube). Cat. No. 3114-0050 has a brim capacity of only 42mL but is designed to fit standard rotor. Includes: Screw caps. Additional sealing cap assembly available separately (DS3131-series). TeflonTM is a trademark of The Chemours Company FC, LLC used under license by Nalge Nunc International Corporation. † The term “leakproof” applies to Thermo Scientific Nalgene products that meet the following criteria: a) Bottle/flask/funnel closure systems with closures smaller than 100mm, after they are filled with water, inverted, withstand air pressure of 2psig for 2 minutes, and no water escapes;. b) Bottle/funnel/flask closure systems of larger than 100mm after they are filled with water, inverted for 15 minutes, and no water escapes. Note: these tests, using other liquids, may not yield the same results. To ensure safe usage, customers are advised to test Thermo Scientific Nalgene bottles and closures under conditions of their planned applications. Thermo Scientific Nalgene products are leakproof at ambient temperature and pressure when used with their Nalgene closures.