Other equipment

This handheld manometer is designed to render O2 measurements and caters to all wall plug in medical offices and hospitals. The Mercury handheld manometer is easy to use and comes with a rechargeable battery. Some of the other features ...

O2 gas and pressure analyser with CO2 detection. Medical fluid detector The MERCURY is an O2/CO2 gas and pressure analyser that is portable, reliable and durable. Compliant with NF EN ISO 7396-1, the MERCURY controls medical gas networks. ...

Origin of effluents Laboratories, mortuary services, dialysis, pet shops, and all other industries discharging effluent bacteriological risk or pH outside the admitted range of neutrality. These effluents will be fed to the local technical ...

Origin of effluents Nuclear medicine departments and laboratory preparation stations, brachytherapy, laboratories, and other industrial liquid waste contaminated with radionuclides. French legislation: Arrêté du 23 juillet 2008 Guide ...

CBRN or CBRND defense consists of CBRN passive protection, contamination avoidance and Chemical, Biological, Radiological and Nuclear Defense. MEDICAL PROCESS plant meets the French specifications on the temporary storage of these ...

With a treatment capacity up to 1,800 liters per day and 3,600 liters per day, the UltiBatch decontamination system has been designed to offer a standard batch solution configurable with options. This compact and cost-effective model ...

Modular and evolutive: an innovation that evolves with your production! ACTINI has designed a continuous thermal effluent decontamination system that is fully standardized for bio-industries and laboratories that do not have specific ...

The IHC Hytech CO2 scrubber unit removes CO2 from the atmosphere in hyperbaric chambers. The scrubber has an induced flow fan that pulls breathing gas through a canister filled with soda lime to adsorb CO2. Features • Fan motor ...

The Hyperbreeze IV scrubber is a compact CO2 scrubber unit. It is especially suitable for use inside smaller hyperbaric/decompression chambers, where space is limited. The unit has a clamp that holds two CO2 adsorbent canisters. It ...

The single heat exchanger is designed to control the temperature in a diving system or decompression chamber. The heater unit consists of a fan and a heat exchanger coil. The coil can be used both for heating or cooling the chamber ...

The Ultra Centrifugal Mill ZM 200 is a high speed rotor mill with unmatched performance. It is used for the rapid size reduction of soft to medium-hard and fibrous materials. Because of the efficient size reduction technique the ZM 200 ...

REDLINE® manual panels Gas panel is the place where the cylinders are changed, etc. It can be considered the heart of the central gas system. Linde has two types of manual gas panels: single and double. Single panels handle one ...

REDLINE® semi-automatic panels Gas panel is the place where the cylinders are changed, etc. It can be considered the heart of the central gas system. Semi-automatic panels handle two cylinders/bundles at a time. When the pressure ...

BASELINE® manual panels Single panels for centralised supply of gases with purities up to 5.0 Manual gas panel S 100 S 100 is designed for cylinders or bundles containing compressed or condensed gases. It is mounted on a stainless ...

Flow: 5 l/min
Power: 14 W
Pressure: 0.2 bar - 0.4 bar

Specifications Rated Pressure: - 0.2 bar Rated Airflow: - 5 l/min Rated Voltage: - 230 V 120 V Maximum Pressure: - 0.4 bar Power Consumption: - 14 W 14 W Rated Frequency: - 50 Hz 60 Hz Life Expectancy: - 10.000 h Outlet: - ...

Flow: 20 l/min
Power: 19 W
Pressure: 0.1 bar - 0.2 bar

Specifications Rated Pressure: - 0.1 bar Rated Airflow: - 20 l/min Rated Voltage: - 230 V 120 V Maximum Pressure: - 0.2 bar Power Consumption: - 19 W 19 W Rated Frequency: - 50 Hz 60 Hz Life Expectancy: - 6.000 h Outlet: - ...

Flow: 28 l/min
Power: 25 W
Pressure: 0.1 bar - 0.3 bar

Specifications Rated Pressure: - 0.1 bar Rated Airflow: - 28 l/min Rated Voltage: - 230 V 120 V Maximum Pressure: - 0.3 bar Power Consumption: - 25 W 25 W Rated Frequency: - 50 Hz 60 Hz Life Expectancy: - 10.000 h Outlet: - ...

Our windows for Clean Rooms are designed to be flush on both sides of the panels with silicone perimeter sealing and made of double safety glass to provide a total thickness identical to that of the panel. DESCRIPTION As an option, ...

The RLM – 750 PT MIST automatic encapsulation shower cabin for dust removal is especially designed as an entry and exit barrier for controlled contamination areas. DESCRIPTION The RLM – 750 PT MIST automatic encapsulation shower cabin ...

Air shower for persons. Self-supporting equipment especially designed for maximum dust particle removal from persons by kinetic action in the final stage of entry to highly classified areas. The self-supporting solution allows easy installation ...

Special brush for gentle cleaning of tracheostomy tube Flexible Bristles in dense array around the stainless steel wire base which is twisted to avoid sharp edges which might damage the tracheostomy tube The brush tip of OPTIBRUSH® ...

Special brush for gentle cleaning of tracheostomy tube Flexible Bristles in dense array around the stainless steel wire base which is twisted to avoid sharp edges which might damage the tracheostomy tube The brush tip of OPTIBRUSH® ...

Cleaning swab is intended for gentle cleaning of tracheostomy tubes Flexible plastic stick with an absorbent foam tip Foam tip made of polyurethane No fluff or lint, so reduced risk of tracheal irritation Especially suited for tracheostomy ...

Gas manifolds are designed to supply the pipeline system with sufficient quantity of gas by cylinders and/or tanks. The typical manifold for medical gases (oxygen, nitrogen, CO2 or medical air) according to EN ISO 7396-1 or HTM 02-01 ...

CONTROL-CLOSING BOXES Keep all gases in your building under perfect control Control boxes are installed in individual floors and allow control of the status of medical gases throughout the building. Medicop boxes include all features ...

A perfect finish starts at the feeder. The Unix is the Lapauw clamp feeding machine that combines optimal feeding quality with high speed. FROM 2 TO 4 FEEDING STATIONS With 2, 3 or 4 feeding stations, the UNIX offers you efficiency ...

UNIFEED ENHANCES FEEDING QUALITY The UNIFEED creates a powerful airstream that shakes the sheets before they enter the ironer. This shaking straightens the sheets and, thus, enhances feeding quality. UNDER THE FEEDBANDS With the UNIFEED, ...

Starfeed+ is a single person, one-lane clamp feeding system. Next to the clamps, the Starfeed+ is equipped with a vacuum box and perforated feeding belts Thanks to the clamps, a single operator can feed up to 250 – 300 sheets per hour. The ...

The CASERO care and service robot will be used in residential care facilities and hospitals, as well as hotels, public entities, and offices for internal transportation. The transport vehicle can navigate freely and supplies patients ...

There are automated guided vehicles (AGV) in stainless steel as well for clinics and hospitals. All covers and lift devices are sealed to meet protection class IP54. The automatic vehicles are protected against splash water and can be ...

The automated guided vehicle systems (AGVS) used in pharmaceutical production are designed to conform to GMP and FDA requirements upon request. They can also be converted for various cleanliness classes and thus may be used in clean ...

Flow: 16, 250, 100, 320 m³/h

Central vacuum systems with tank capacity of 25lt - 5000lt Control System: Automatic Control Panel or Thermal Switch The technical expertise of Zinisan Vacuum is at your side for the most suitable solutions for all your vacuum system ...

Capacity: 145 l
Temperature range: 0 °C

KEY FEATURES Internal Forced Air Flow Digital Temperature Display with High and Low Temperature Alarms Max/Min Temperature Logging • Internal LED Lighting • Cable/Monitoring Port Hole BMS (voltage free connection for remote monitoring ...

Capacity: 200 l
Temperature range: 0 °C

KEY FEATURES Internal Forced Air Flow Digital Temperature Display with High and Low Temperature Alarms Max/Min Temperature Logging • Internal LED Lighting • Cable/Monitoring Port Hole BMS (voltage free connection for remote monitoring ...

IndiMag 48s Fully automatic extraction system from INDICAL for the rapid isolation of nucleic acids from a broad variety of sample types using magnetic bead technology. Fast, flexible and compact Throughput: 1 to 48 extractions ...

MEDICINAL GAS DEPRESSING CENTRAL PEGISDAN is a decompressor medical center designed and manufactured by PEGISDAN at its headquarters in Madrid (Spain) according to UNE-EN-ISO 7396-1 / 10524 and NFPA-99-2015. Different models We have ...

CONTROL AND ALARM BOXES Medical gas control and alarm box designed and manufactured by PEGISDAN at its headquarters in Madrid (Spain) according to UNE-EN-ISO 7396-1 / 10524 and NFPA-99-2015. Departmental The control box designed by PEGISDAN ...

ClimaPlus touch-screen controller Easy to use touch-screen interface with graphical view of programs and climatic variables. Password protection of controller functions. Non volatile memory. Controls every environmental variable available ...

Cleaning brush with two identical Brushes Ø 3 mm for bronchoscope Description Cleaning brush with two identical Brushes Ø 3 mm for bronchoscope Specifications: The cleaning brush set contains three different brushes consisting of the ...

Description Cleaning Brushes set for gastroscope Application Area: gastroscope Content: consisting of 3 Brushes: – a Double brush – a Flush channel brush – a Double valve brush

Surgical Scrub-brush DEA srl is authorized by Italian Ministry of Health decree n. 15/2011 for the packaging of surgical scrub brush with chlorhexidine gluconate and povidone iodine.

Activation detectors for a wide range of different requirements for the opening and closing of automatic doors GEZE activation detectors are offered for a wide range of installation possibilities: wall, floor or ceiling installation. ...