Other sample handling equipment

• single-use medical glove, latex-free • suitable for use as chemical-resistant gloves in a wide range of medical and laboratory settings • wide selection of colours material: nitrile colour: available in 7 different colours properties: ...

Capacity: 659.8 l
Temperature range: 4 °C - 80 °C
Height: 2,028.8 mm

FARRAR® pioneered forced air convection cooling to answer the challenge of preserving biologic samples and materials. The Controlled Rate Chamber (Model 4000) provides repeatable, precise, and rapid freezing and thawing of bulk materials ...

Speed: 0 rpm - 7,000 rpm
RCF max (g): 2,680 unit
Weight: 0.5 kg

Space- and energy-saving micro centrifuge with adequate power for routine centrifugations. lid must be closed for operation mode safety: the lid can only be opened when the rotor is not rotating rapid start and stop within ...

Speed: 0 rpm - 15,000 rpm

Micro Centrifuges to 0.2 Litre max Prime multi rotor Centrifuge Speed 15,000 Rpm max(10Rpm steps) Rcf Max10 - 22,000G Timer0-9 Hours & Hold (30 sec steps) Dims HWD280 x 240 x 360mm Weight12.8 Kg (without rotor) Power125 Watts Memory99 ...

Universal trays The universal tray can be fitted with clamps for Erlenmeyer flasks, test tube holders, microtiter plates, or custom made holders to suit your requirements. Rearranging these clamps and holders is quick and simple. Special ...

This cooler safely holds thirty-two 0.5, 1.5 or 2.0ml microcentrifuge tubes or cryogenic vials at a temperature below -15ºC for approximately 1½ hours. Use included insert to hold 0.5ml microcentrifuge tubes. Store at -20ºC for 24 hours ...

Speed: 12,000 rpm
RCF max (g): 6,900 unit

Includes 12-place microhematocrit rotor and 6-place microtube rotor Digital speed and time for accurate results Small footprint and quiet operation

Save your digital slides in one central location Organise cases with barcodes and configurable access rights Share digitized slides with your colleagues – anytime, anywhere CaseCenter is the web-based database for your digitized ...

Temperature range: -25 °C - -15 °C
Height: 860 mm
Depth: 500 mm

New energy efficient and environmental friendly MEDLAB SAVE range is designed and manufactured for the exacting standards of Biological, Pharmaceutical, Life Sciences and laboratories. Fan assisted air distribution ensures accurate product ...

Constructed in stainless or galvanized steel, the sample splitter has a wide application since it can be used for fine aggregates as well as many coarse sizes. Sample is poured into the hopper chute and the riffle splitter divides it ...

The Manual Single Tube Picker is a manual device designed for one-handed operation, incorporating an eject button enabling tube picking and placing whilst avoiding contact between the hand and tube. Easy to use whilst wearing gloves Removes ...

Imagel - Gel doc imaging using your smart phone camera. Save your gel images to your phone. Hood dimensions: 17cm (W) x 17cm (D) x 14cm (H). Compatible with iPhone® 4/4S, 5/5S, 6/6S, 7 (For Samsung Galaxy S® 3/4/5 compatibility, click ...

The XenoWorks™ Digital Microinjector is designed primarily for transgenic mammal workstations and adherent cell, C. elegans, drosophila, zebrafish, xenopus and sea urchin injections. It is capable of holding oocytes and embryos while ...

iMiGiNE is a robotized system capable of producing various radiopharmaceuticals used in PET imaging PET imaging is one of the most powerful and least invasive ways of observing the metabolic activity of an organ and a tumor or any ...

Blood Thaw Machine LBTM-A10 can accommodate up to 6 blood bags with 50 to 200 ml capacity. This machine is constructed with 304 stainless steel with a spacious chamber volume of 20 L. Incorporated with a decomposable water tank with an ...

Speed: 200 rpm - 15,000 rpm
RCF max (g): 21,380 unit
Weight: 12 kg

Ideal for high-end research applications, the Medline MD3024R 15,000rpm High Speed Refrigerated Microcentrifuge can be used in physical and chemical analysis, biochemistry, cellular and molecular biology, clinical laboratories and blood ...

SorbStar is the new sachet and canister desiccant inserter designed by Capmatic. The frame of the SorbStar is made of anodized aluminum with a stainless steel exterior. The electrical and mechanical parts are located inside the frame ...

TRO-SENSOSOFT examination gloves are prepowdered, ambidextrous and non sterile. They are seamlessly manufactured from latex or vinyl material, which makes them extremely resistant and gives them highest tensile strength. Their excellent ...

Materials: medical dialysis paper, water glue, hot melt glue. Coating method: Coating on four sides (frame), full coating and full grid pattern. Coating: hot melt glue 5-12 g/m2, water glue, water glue 2-3 g/m2. Sterilization method: ...

VEE GEE Scientific Porcelain Buchner Funnels are manufactured to the highest standards and are glazed inside and out with the exception of the rim. Great for cannabis Filtration and come with a fixed perforated plate. Sold as each.

This nitrile chemical protective glove manufactured by Berner has long chemical permeation breakthrough times and thus offers the best protective properties against a wide range of cytostatics, chemicals and biological agents. It is suitable ...

Speed: 0 rpm - 16,000 rpm

* Microprocessed Control with Carbon-free Motor. * LCD display with parameters for speed, time, RCF, Program Information (Memory), Acceleration & Deceleration Information and Information Code mistakes. * ABS centrifuge body with ...

Selecta 150 liters desiccation and sterilisation oven

JNBAN Belt Vacuum Drying (BVD) is a method of continuously distributing liquid raw materials on a conveyor belt under vacuum conditions.The materials are dried with the conveyor belt on the heating plate, and then cooled, embrittled and ...

Article No.: WLG8001 The latex gloves prevent messy residue that can get into paints, sealants, and adhesives, yet they’re still easy to get on and off thanks to their double chlorinated coating. Description: Material: latex Grade: ...