Bubble humidifiers

Silbermann Humidifier is used to moisturize the Oxygen delievered to the patient. Our re-usable humidifiers is made of polycarbonate top autoclavable at 121 deg F (121 deg C) , polysulfone jar autoclavable ...

... HAMILTON-H900 humidifier has been developed with focus on ease of use and patient safety allowing you to focus on the important aspects of patient care. An innovative two-step setup helps you get started quickly. All ...

... Flowmeter, Oxygen Therapy Device products. Humidification Cup Lid is made of chrome-plated brass material. Polycarbonate humidifier bottle with 0,20 lt and 0.25 lt capacity (suitable for 121 and 134 degrees autoclave)

The humidifier is intended for medical applications of oxygen therapy for hospital and home use, to relieve drying of the mucous membranes caused by pure oxygen. The device is connected, for example, to reducing valves, ...

The humidifier is intended for medical applications of oxygen therapy for hospital and home use, to relieve drying of the mucous membranes caused by pure oxygen. The device is connected, for example, to reducing valves, ...

” in designing OxyOne™, humidifier for single-patient use oxygen, we have been guided by a strong sense of responsibility born of this time: the certainty that it is necessary to offer a sanitized product, which guarantees ...

... : • 327 g (empty) Materials: • Transparent High resistence polycarbonate injection or Aluminium anodized finish Cap Humidifier • Brass Chromated finish coupling connections • Stainless Steel oxygen diffuser • ...

... Maximum gas flow 32 l/min. The humidifier is autoclavable up to max. 134°C. Intended for use in clinics and hospitals. The humidifier is certified in accordance with EN ISO 8185. CE marking according ...

The prisma VENT AQUA is a respiratory gas humidifier for non-invasive ventilation. The device automatically detects the connection to a heated hose system and temperature sensor and starts up in the corresponding mode. The ...

A choice of standard format or occlusion protection bubble humidifiers, for use with oxygen therapy flowmeters, for the humidification of inspired gases. Fully compatible with the Penlon flowmeter ...

The humidifier for oxygen therapy is a device allowing an increase in the relative humidity in the oxygen supplied to the patient; this gas for medical use normally lacks a sufficient humidity grade to be physiologically ...

... disconnecting the expiratory circuit Babi.Plus® Bubble PAP Valve provides a continuous positive airway pressure to pre-terms, terms and infants weighing less than 10 kg　for spontaneously breathing. Bubble ...

The humidifier is used in oxygen therapy to humidify the oxygen breathed by the patient; it is connected downstream of the flowmeter using a G 1/4" F R thread; it is a class IIa non-active medical device and is not supplied ...

The bubbling humidifiers for oxygen therapy series EasyOX® are devices used to increase the relative humidity in the treatments with medical oxygen, both for hospital and homecare applications. Medical ...

... to know the new FOG 2140A, a Humidifier with a servo-controlled heating system that sets inspiratory gas temperature and can be adjusted at different temperatures. After setting the temperature, the respiratory Humidifier ...

... robustness. Equipped with a very silent diffuser for the comfort of the patient. Reusable humidifiers leading to cost savings compared to single-use humidifiers.

AEROpart® - Bubble Humidifier - AB01-916 Bubble Humidifier, disposable, for humidification of breathing gases administrated to a patient during oxygen therapy. Maximum ...

Flowmeter Accessories Reusable Humidifier (135 ml)

Uses a constant-pressure system that shows accurate flow rates. Visibility. Red float and easy-to-read scale. cleanliness Large bottle mouth for easy cleaning. safety Bottle connection with DISS standard screw

... delivered in excess of 4 l/min. Increased Humidification The fine diffuser at the inlet tube end produces very small gas bubbles that maximise the surface area, providing increased humidification with a low noise ...

... oxygen, a humidifier is needed that is why we have available reusable humidifiers as well as single-use humidifiers. The humidifier works by passing the gas into the ...

The new active servo-controlled WETTY humidifier is designed to heat and hydrate respiratory gases allowing thermo hygrometric conditions settings of delivered gas mixture to patient and parameter control to be shown ...

• 6-15 LPM • Features 6 PSI (414 mbar) pressure relief valve

Oxygen Inhaler (Oxygen Flowmeter With Humidifier 45-85ml) We are proud to introduce the Pigeon Medical oxygen inhaler, which equipped a 1-15LPM flow meter for pediatric and neonatal respiratory care with the high-quality ...

The Roscoe Empty Humidifier Jar is a single patient use product designed for long-term use and reliable performance. It operates quietly and will activate an audible pressure safety alarm at 6 psi. Large, easy-to-grip ...