- Medical Technical Facilities >
- Hospital infrastructure >
- Carbon dioxide gas generator
Carbon dioxide gas generators
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Output: 1 l/min - 50 l/min
Output pressure: 6 bar
F-DGS’s DEIMOS UZA.TOTAL Ultra Zero Air generators is able to remove Total hydrocarbons to less than 0.05 ppm and others polluant like H2O, CO2, CO, NOx, SO2. CO and THCs are removed using heated ...
Output: 6, 3, 1 l/min
Output pressure: 6 bar
Rated capacity: 1,100, 700, 300 W
F-DGS’s DEIMOS TOC Air generators are some of the smallest and most efficient Hydrocarbon-free air and CO2 purifier systems for laboratory use. Utilising a heated catalyst ...
Output: 8 l/min - 26 l/min
Output pressure: 7.6, 5.5, 4.1, 4.2 bar
Gas purity: 99 %
... remove oxygen, carbon dioxide and water from compresssed air. Purified air is produced using a membrane air dryer. The generator is built with internal air compressors as standard, ...
Output: 18, 16, 10, 5 l/min
Output pressure: 2 bar
Gas purity: 99.9999, 99.9995, 99.99, 99.9, 99.995 %
... oxygen, some hydrocarbons, moisture and carbon dioxide and subsequently release only ultra high pure Nitrogen gas. The ZNG EOLO XL series is also equipped with a catalyst module to remove ...
Output: 2 l/min - 30 l/min
Output pressure: 1 bar - 2 bar
Rated capacity: 240, 170, 100 W
... installation High flow rate up to 30 L/min Pressure up to 8 bar RS 485 as standard Purity: < 0.05 ppm THC < 0.05 ppm CO NOx SO2 < 5 ppm CO2 No maintenance Reduced ...
Output: 50 m³/h - 1,000 m³/h
... versions will use 5 % feed gas as scrubbing gas for the heated adsorbtion dryer. Example: Needed capacity 1000 m3/h means that you need feed gas of 1050 Nm3/h. Purity of feed nitrogen ...
Output: 1 m³/h - 100 m³/h
... Flow variance ±5%. A few key features of the OXYMAT PSA Nitrogen Generators include: High performance top quality solutions Low energy consumption from 0,2kW/m3 nitrogen Low CO2 ...
Output pressure: 0 bar - 5 bar
... to remove residual CO2 Ready to be connected to the dedicated AirComp compressor Possible parallel connection up to 4 stackable tower configuration generators CPU with Touch ...
Output: 15 l/min
... optimum supply for gas generators and instruments Continuous supply of calibration gas Meets requirements of Federal Register Specification 40CFR 86.114-79 Few moving parts means little ...
Output: 11 m³/h - 1,370 m³/h
Gas purity: 95 % - 99 %
... costs Sophisticated and reliable technology Exact purity for every application No long-term rental commitments Hardly any CO2 pollution for the environment
Inmatec GaseTechnologie
Output: 20 l/min - 120 l/min
Output pressure: 8 bar
Gas purity: 99 %
The nitrogen generator ZEFIRO ZERO uses membranes technology. The system produces laboratory pure nitrogen from an existing in house oil free compressed air supply. Compressed air is forced to pass through a hollow fibers ...
CINEL Srl
Output: 2, 3, 6, 15 l/min
Output pressure: 6.5 bar
Zero air generators completely remove hydrocarbons, CO2, NOx and H20 from the air stream. This avoids the need to use inconvenient air cylinders, which are hazardous for laboratory operations. The AirGen series KZA ...
SRA Instruments
Your suggestions for improvement:
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining