Dental polymerizers

Dental articulators or several flasks in a flask press can be polymerised simultanteously. Pressure, time and curing temperature are adjustible. The heating outside the stainless steel tank is free from wear and grants ...

Dental articulators or several flasks in a flask press can be polymerised simultanteously. Pressure, time and curing temperature are adjustible. The heating outside the stainless steel tank is free from wear and grants ...

Aquamat is used for polymerization of acrylic plastics. The unit is designed for work in dental laboratories. It can work without heating so it can also be used as a pressue chamber. The polymerization unit has two working ...

Interlux is suitable for polymerization of light-polymerized materials which polymerize in wavelength of 350 - 400 nm. Technical data: Dimension (height /width/lenght): 100/219/255 mm Voltage:: 230 V / 50 Hz Power: 36 W

Equipped with pressure gauge, air valve, safety valve and relief valve. Used for polymerisation of self-curing acrylics – Interacryl Cold, Interacryl Ortho, Interacryl Cast and Interacryl Plast. Contents 5 l Max. pressure 2.5 bar/55°C

Pressure polymerization unit of resin that allows the polymerization of crowns and bridges. Description Pressure polymerization unit of resin that allows the polymerization of crowns and bridges. An high precision microprocessor ...

Pressure polymerization unit of resin that allows the polymerization of crowns and bridges. An high precision microprocessor controls temperature and time of polymerization ; temperature is adjustable for hot and cold polymerization. Equipped ...

PMMA denture base materials including dedicated fully automated injection procedure A system for dependable quality. A fully automated injection device and top-class materials – this is our IvoBase system for precision ...

Approx. 6 l content For hot and cold polymerization Incl. inlet valve, pressure gauge and safety valve (GS-TÜV-approved) Nonstick layer inside to avoid corrosion

Solid pressure polymerisation unit for cold and hot polymerisation of dental resins, that is receptive for one brass flask including clamp respectively 2 Castdon flasks with a 90 minutes timer. It has a temperature of ...

Necessary for the polymerization of all kinds of orthodontic acrylics. T1330-00 pressure pot is roomy enough to contain a model occluder or an articulator; T1335-00 pressure pot may contain larger model occluders or articulators. Both ...

For effective final polymerisation of GC GRADIA and GC GRADIA gum shades micro- ceramic composite and for safe polymerisation of the opaque layers. Advantages Excellent light-curing ability Safe polymerisation Integrated ...

Photopolymerization unit combining UV light and heat for post-treatment of the restoration. DCURE is a post-treatment device using hybrid technology designed for curing Irix Max, Irix Plus and Temporis materials. The evenly distributed ...

✓ Completely built in stainless steel Intuitive programming Water presence sensor Easy water drainage ACRYDIG polymerisers are made entirely of stainless steel to ensure a long service life. The special closing lid prevents vapour ...

WET AND DRY PRESSURE POLYMERIZATION UNIT polymerization unit for wet and dry polymerization completely automatic process two stage polymerization microprocessor control of the temperature and polymerization time stainless steel chamber TECHNICAL ...

The Trimax is a composite contact instrument. By placing the tip into deep restorations or tight anatomically contact areas the operator can polymerize deep restorations with correct proximal anatomy. The micro light guide has a marginal ...

Muffle polymerizing unit engineered in a stainless steel housing. Easy-to-read, precise and reliable control software. The working cycle is performed over two distinct stages: pre-heating and final polymerization, and all parameters ...

... full denture resin, charged with composite micro-pearls. For a very high quality polymerization set the pressure to 2 Bar and fill the chamber with at least 3/4 of water. P. 1 Vertys Prothesis Hot Ideal programme ...

Made of stainless steel. Tank of anodyzed aluminium with triple safety system when lid opening and closing. Its automatic computerized control makes possible a switch on controlling time, temperature rises and controlled temperatures. When ...

Polymerizing units for 6 or 12 muffles. This units are entirely made of stainless steel. The electronic board controls polymerizing cycles and gradual switching off. In this way the muffles naturally cool to avoid micro cracks of resins. ...

... adjustable digital timer and a top notch magnetic noise free fan. With the ability to polymerize a composite teeth tray and produce pre-implantation teeth mound, this light cure machine uses power volage ...

... use by dental lab professionals. The lab light curing unit is intended for polymerization of dental resin-based composite (CQ, PD contained material), appllied in the field of light-cured impression tray, ...

Equipment for polymerization of light curing tray material, brillant laquer and other light curing materials by UV-light. (power 60 W - tension 220v).

Device which allows photopolymerization of all active photo materials available on the market. It is equipped with 8 fluorescent lamps and one 150W halogen lamp, arranged around a rotating plate, which emits UVA rays and white light (photopolymerization ...

SIBARI SR 620 - Photopolymerizator SR620 fotopolimerizzatoreSIBARI allows the lightpolymerizing of all acrylic and light-sensitive materials on the market. The material to be lightpolimerized is placed on the rotating plate which allows ...

... composites, 3D printing and tray materials. The new IP Lighting Pro is ideally equipped for modern light-curing resins in the dental industry and convinces with perfect interaction of UV, blue and daylight LEDs with ...

Mains frequency~50 Hz Rated power~230 V Power Consumption1300 W Weight7 kg Dimensions (width x height x depth)215x355x270 Power consumption16 A Volume2 liter Compressed air connection6 bar Operating temperature15-40 °C Storage temperature5-40 ...

... Wavelength range 385–550 nm Timer 0-99 seconds Chamber 15 × 16 × 10 cm Dimensions 22 × 30 × 30 cm Weight 10 kg Suitable for: Dental Labs Jewelry Labs

Electronic polymerization unit. Built following the tradition for sturdiness, practicality and durability. Designated uses: polymerizing, curing resins, pressure chamber, press for plaster investment materials. Main features Cures any ...