Hospital bed actuators

Load capacity: 1,100 N
Speed: 32 mm/s - 54.1 mm/s

Actuator, Electrak GX, 1 x 115 Vac, Dynamic Load: 1100 N, acme, 54 mm/s , Max Stroke Length: 10 inch, Control: Hand Wind Robust and Reliable Acme and Ball Screw Models Static Load up to 18kN/4000lbf Dynamic Load ...

Load capacity: 4,000, 6,000 N
Speed: 5, 43 mm/s

... linear actuator is designed for lift applications like recliners, lifting chairs and movie theater seating. Its right angle design reduces noise and allows for fitment into most applications. Industry certifications ...

Load capacity: 6,000, 4,000 N
Speed: 4.2, 14.5 mm/s

... linear actuator is primarily used in the medical market. This actuator series handles high loads and is designed with a manual crank attachment. If necessary, medical ...

Load capacity: 1,500 N
Speed: 10.5, 13.1 mm/s

TiMOTION’s TA11 series linear actuator is one of our compact medical actuators, suitable for various healthcare applications. Its compact design supports load ratings up to 1500N. TA11 ...

Load capacity: 6,000, 12,000 N
Speed: 4, 57.3 mm/s

TiMOTION’s TA12 series linear actuator is designed primarily for high-load patient lifts, bariatric beds, and other medical eauipment. These sensitive applications require a linear actuator ...

Load capacity: 5,500, 10,000 N
Speed: 4.5, 49.4 mm/s

TiMOTION’s TA13 series linear actuator is designed primarily for dental chairs requiring high-push load solutions, but can also be applied to a wide range of other medical applications. The TA13 supports ...

Load capacity: 6,000 N

... pressure water.Our actuators are each individually tested in our warehouse prior to shipment to ensure that it will deliver trouble free operation and outstanding performance. Linear actuator carry ...

Gas spring for mortuary stretcher trolley Gastac has different kinds of Locking Gas Springs have elastic or rigid locking character to produce The mortuary stretcher trolley has been designed to carry out safe and dignified removal ...

... damper for Hospital bed Gastac has different length and damper force to produce.And also we produce hospital bed side rails. Hydraulic damper for Hospital ...

Load capacity: 600, 1,200 N
Speed: 4.5, 7, 7.4, 10.5 mm/s

1.Max load push：600N, 1200N 2.Max load pull：600N,1200N 3.Color：black 4.IP grade：IPX4/IPX6 5.Motor voltage：24V 6.Stroke length：0-300mm（600N）, 0-300mm（1200N） 7.Installation：L=S+155 (S≤300，without hall) ...

1.Max. load push : 6000N 2.Max. load pull : 4000N 3.Input voltage :29VDC 4.Color: Black/Grey 5.Noise level≤45dB(ambient level≤35dB) 6.IP grade : IPX4 7.Stroke length:50-200mm(±2mm) 6000N 8.Mechanical limit switches:upper limit ...

Speed: 4.7, 3.5 mm/s

1.Max load thrust up to 2*4500N 2.Color: light gray or black 3.IP grade:IPX4 4.Input Voltage:100VAC～240VAC 5.Backrest stroke:Max.87mm 6.Footrest stroke:Max.69mm 7.Single motion noise level:≤50dB (ambient level≤40dB) 8.Linkage motion ...

Speed: 4, 6 mm/s

1.Load thrust up to 6000N 2.Max. load pull 4000N 3.24V DC permanent magnet motor 4.IP Grade:Max.IPX6 5.color: Black/Grey 6.Noise levelc≤48dB (ambient level≤40dB) 7.Electrical limit switches : built-in 8.Safety Nut 9.Short stroke ...

1.Thrust up to 8000N 2.Color: light gray or black 3.Manual lowering: red 4.IP rating: IP66 5.Input voltage: 24VDC/29VDC 6.Stroke length: 0-400mm(±2mm) 7.Retracted length: L=S+260 (S＜300)， L=S+290(300≤S≤400) 8.Noise ...

1.Load thrust up to 8000N 2.Max. load pull 4000N 3.Color: Grey /Black 4.Max IP rating: IPX6W 5.24V DC permanent magnet motor 6.Stroke length:50-500mm(±2mm)8000N 7.Noise level≤48dB(ambient level≤35dB) 8.Safety nut: standard 9.Electrical ...

1.Load thrust up to 10000N and 12000N 2.Max. load pull 6000N 3.Shell Color: Grey 4.Manual clevis:Red 5.IP rating: IP66 (standard or with manual lowering) 6.24V DC permanent magnet motor 7.Stroke length:100-350mm(±2mm) ...

Speed: 4.5 mm/s

1.Dynamic load push:6000N 2.Colour: Black 3.IP grade: IP21 4.Motor: 29 V DC 5.Stroke length: 50-300mm (6000N) 6.Retracted length: L≥S+150(50≤S≤200) L≥S+160(200＜S≤300) 7.Noise level: ≤46dB (Ambient Noise ...

Speed: 5, 9 mm/s

1. 24V DC permanent magnet motor 2. Thrust up to 3000 N in push and up to 2000 N in pull 3. Color: grey or black 4. Standard protection class: IP54 5. Compact design and small size 6. Stainless steel pipe with inner tube 7. ...

Speed: 3, 4, 8, 12 mm/s

1. 24V DC permanent magnet motor 2. Thrust up to 6000 N in push and up to 4000 N in pull 3. Color: grey or black 4. Standard protection class: Ip54 5. Stainless steel pipe with inner tube 6. The average noise level is lower ...