Impression copings

The stable impression copings are used together with the laboratory analogues for the exact transfer of the implant position in the jaw onto the plaster model or combined with ScanAnalogs in the software.

The height of the Bite Impression Coping is low so that the impression and bite can be done at once. Unlike conventional copings, impression material ...

Titanium - Abutments to be used for impression taking. Suitable in case of reduced implants’ divergence in particularly difficult areas.

Coping for temporary abutment SpecificationsCod. For collars Ø 4,6 (3 pcs.)50041203 For collars Ø 5,5 (3 pcs.)50041303 Peek - Promotes closing of the margins of the temporary abutment.

Delrin - Ø 4,6 (3 pcs.) - This is snapped on to abutments and can be used to reproduce the exact morphology of the abutments after any adjustment in the mouth. Only for straight abutments.

... cannot be used. · Used when there is inadequate inter-arch distance and a standard abutment cannot be used. · A fixture level impression is taken, and the soft tissue contours can be supported.

... cannot be used. · Used when there is inadequate inter-arch distance and a standard abutment cannot be used. · A fixture level impression is taken, and the soft tissue contours can be supported.

... the Neoss Implant System Guidelines (10501) and IFU for Neoss® TiBase Abutments and ScanPosts (11424) Ø3.25 specific Impression Coping, Replica and Lab screw are also color coded in royal blue.

... eliminated.NeoLinks are co-packed with straight plastic copings and offer both an economic and uniquely flexible solution. The NeoLinks can be incorporated into the Esthetiline Solution by using the NeoLink Plastic Copings ...

... Open and Closed Impression Taking The Neoss System offers one universal implant level impression coping for both ‘Open’ and ‘Closed’ tray impression techniques and a ...

The impression coping is complete with a long prosthetic screw.

Implant Impresion Copings Direct Technique Implant impression copings to be used in direct techniqueand for unitary implants. There are three lengths available depending on the different ...

Impression Coping Family for Indirect Technique Impression coping family for indirect technique direct to implant either for unitary or multiple (rotating) impression ...

Transfer of clinical situation – allows for replication of implant position in the impression material to accurately position the implant replica

Overdenture in toothless jaw on two implants Self-aligning design for easy fixation in the mouth with one click Low height to give more room, even under limited space conditions Flexible retention for individual determination ...

... range will be discontinued after September 1st, 2016. A tapered abutment impression coping used with 3M™ MDI Hybrid Implants & Prosthetics. MDI Tapered Abutment Impression Coping ...

... components corresponding to prosthetic connectionslender emergence profile accommodates space limitationshigh precision impression components give an exact replica of the intraoral situationclear-cut tactile response ...

... and Twist Lock™ Transfer Copings are available in the Certain Internal Connection design, in three EP® (Emergence Profile) diameters and a straight diameter to match the corresponding Healing Abutment. The Impression ...

... means of appropriate components in the laboratory. The poly cap is shipped with the Esthetic Abutment and can be used as impression or as polymerization support tool.

- Material : Titanyum Alloy ( Tİ - 6AI-4V, ASTM F136 ) - Characteristics : Impression post.

The ideal dental implant would resist the biologic and mechanical attacks it will face in its lifetime. Healthy, robust bone and soft tissue should surround the implant from day of placement, combating infection and preventing tissue ...

accurate impressions in a snapThe snap coping offers an accurate implant-level impression for single or multiple units with an easy to use closed tray, pick-up technique. one-piece ...

... information "Impression post short Hex Connection (closed)"Available in diameters 3.3 mm / 4.2 mm / 5.3 mm for all Impla implants in the Hex Connection range, this impression post facilitates the transfer ...

Made of medical grade 5 titanium. They allow the fixing of provisional and definitive screw-retained prosthesis to the abutments. They are also used for intraoral and extraoral welding techniques. Height: 10 mm. Pack of 2

... closed and screw-retained impressions Can be used as an impression coping and gingiva former Can be easily demoulded and precisely repositionedSKY® fast & fixed / uni.cone snap ...