Medical device fittings

... hole sites, pass the Female Luer-to-Barb Bulkhead Fitting through the regular hexagon of mounting stator Step 4. Rotate the fixing nut through the male thread of the Female Luer-to-Barb Bulkhead Fitting ...

... Anti-twist Flangeless Fittings are standard fittings with elbow threads, which can be used without tools and are economical and durable. Just put the nut and ferrule on the tube and screw them into the ...

Pre-torque Flangeless Fittings offer a unique connection for hand-tight fittings by clicks when the resistance of the cap increases until reached the correct torque, it is made of PP or PTFE material ...

... mounting into fluid systems. Application Note of Flangeless Fittings 1. Choose 1/4-28 nut when receiving port is 1/4-28; Choose M6 nut when receiving port is M6. 2. Before connecting fittings, ...

Flanged Fittings is the traditional finger-tight fittings for connecting Teflon tubing and performs well in high pressure up to 1.5Mpa non-movable systems, the advantage is that tubing end will not be ...

Flangeless fittings benefit a lot for low pressure (up to 0.8Mpa) removable and reusable systems. RUNZE offer a variety of nut designs for wide application requirements both on mounting and functioning Flangeless Fittings ...

Super Flangeless Fittings, an advanced type of our flangeless fittings, are made of two different configurations with the difference of with or without lock ring, all of them are workable for tubing OD1.6/2.0/.5/3.0/3.175/3.2mm. ...

PEEK One-Piece Fittings are manufactured with standard knurl for 1/16" OD tubing used in 10-32 coned ports at wide temperature range -100°C~+250°C and higher pressure than common PEEK flangeless fittings. PEEK ...

... Flangeless Fittings come with PEEK flangeless nut and ETFE ferrule for your convenience. Flangeless fittings are excellent replacements for flanged fittings, they are dependable, easy ...

PEEK flanged fittings is one of the new products made by RUNZE, which combined with flanged joint and PEEK material superior performance. Flanged fittings is a traditional flat-bottomed fitting, ...

Medical equipment parts Material: stainless steel, aluminum, titanium, etc Features: corrosion resistant, and good thermal conductivity, High strength and good wear resistance

Medical parts fitting Material: PEEK Features: Corrosion resistance, acid and alkali resistance, high precision Medical plastics have a wide range of excellent properties to ...

Medical robot parts Materials: stainless steel, titanium, titanium alloy, PEEK Features: small size, high precision, high hardness, no burrs

Medical equipment valve pin Material: Stainless steel Features: high precision and difficulty.

Medical fitting Material: ETFE Features: Corrosion-resistant, recyclable materials, can be reused

Medical infusion filter cartridge Features: Can better control the flow rate of liquid

MicroGroup compression fittings allow quick, easy connection to a wide variety of materials and tube diameters. These handy components eliminate the need for time consuming and costly secondary operations including welding, ...

Animal Free Polypropylene Large Bore Luer, Female Luer Lock to 1/4" (6.4mm) ID Tube, Cleanroom Manufactured Extended Description Animal Free Polypropylene female luer thread style with large bore to barb for 1/4" (6.4mm) ID tube Mounting ...

Medical Nylon Large Bore Luer, Male Luer Lock to 3/16" (4.8mm) ID Tube, Cleanroom Manufactured Extended Description Medical Nylon male luer thread style with large bore to barb for 3/16" (4.8mm) ID ...

ISO 80369-7 Female Luer Lock to 1/16" Barb Bulkhead, Animal Free Polypropylene Extended Description Animal Free Polypropylene female luer lock bulkhead connector with 1/16" barb Ambient Temperature Yes Mounting Style Panel ...

ISO 80369-7 Female Luer Lock to 3/32" Barb Bulkhead, Animal Free Polypropylene Extended Description Animal Free Polypropylene female luer lock bulkhead connector with 3/32" barb Ambient Temperature Yes Mounting Style Panel ...

ISO 80369-7 Female Luer Lock to 1/8" Barb Bulkhead, Animal Free Polypropylene Extended Description Animal Free Polypropylene female luer lock bulkhead connector with 1/8" barb Ambient Temperature Yes Mounting Style Panel Mount Connection ...

Female Luer Lock to 1/32" Barb, Lipid Resistant Rad. Stable Polycarbonate Extended Description Lipid Resistant Rad. Stable Polycarbonate female luer thread with 1/32" barb Mounting Style In-line Connection 1 To suit 1.0 mm ...

Male Luer Lock to 1/4" Barb, Kynar - IMPORTANT - Contact us for other material options Extended Description Male Luer Lock to 1/4" Barb, Kynar Mounting Style In-line Connection 1 To suit 6.4 mm (1/4") ID Tube Connection ...

... Compliant Yes Other Technical Data Suitable for compressed air and vacuum. The configurations are available on standard fittings. Due to many variations in materials used for tubing, please experiment with the various ...

R1/8" Equal Male Nipple Extended Description Nickel Plated Brass equal male nipple with R1/8" thread Ambient Temperature -20°C – 80°C (-4°F – 176°F) Mounting Style Threaded Connection 1 R1/8" Male Thread Connection ...

... Push-In Fitting Extended Description Nickel Plated Brass swivel banjo elbow with M3 male thread to 3mm OD push-in fitting Ambient Temperature -20°C – 80°C (-4°F – 176°F) Mounting Style Threaded Connection ...