Sterilization material trolleys

Stainless Steel Sterilization Trolley 1 side • Sterilization Trolley 1 side equipped with hooks for Sterilization Baskets transport (3 or 4 levels) • ...

Stainless Steel Sterilization Trolley 1 side • Sterilization Trolley 1 side equipped with hooks for Sterilization Baskets transport (3 or 4 levels) • ...

Linkar combines plastic materials with steel in a synthesis that is both light and sturdy and that can be adapted to every need. Its purpose is functionality: every element can be easily extracted to facilitate cleaning ...

Trolley fixed height, in stainless steel, for loading and unloading with 4 swivel wheels with lock system.

The elevator is practical and easy to handle thank to its manual traction and electric lifting. It allows to lift loads with a maximum weight of 150Kg up to a height of 1560mm. The 24Volt-12Ah battery does not require technical assistance; ...

... with a fall arrest belt. External transfer trolley with height adjustement for thè transport of thè external sterilization units. The container base Is customizable on thè dlmenslons of thè sterilization ...

... cupboard trolley can do it all, regardless of where it is used. Hospitals have relied on it for years as a transport trolley and storage trolley for dirty and clean linen, as an operating ...

... cupboard trolley can do it all, regardless of where it is used. Hospitals have relied on it for years as a transport trolley and storage trolley for dirty and clean linen, as an operating ...

... cupboard trolley can do it all, regardless of where it is used. Hospitals have relied on it for years as a transport trolley and storage trolley for dirty and clean linen, as an operating ...

This cart features a square stainless steel which is loadable from both sides with 25x25 mm tube design and hooks to accommodate 6 to 8 ST baskets with weight capacity of 60kg. It has 4 swivel castors, ø 75 mm, non marking ...

This mobile equipment cart is comprised of a stainless steel frame that is a seamless weld. The external hooks are made for the accommodation of 2 x 4 sterile baskets or accessories. The center is fully ...

Hammerlit Carts can be loaded from both sides. It has squares made of stainless steel measuring at 25x25 mm, a tube design and hooks that can hold 6 to 8 STE baskets or comparable articles. Each of the hooks has a weight ...

... modular cart made of anodized aluminum is designed for internal transport of modules, baskets, trays and shelves of both sterile and non-sterile goods. The cart is equipped with nylon “no noise click” ...

... choose from which go hand in hand with the trolley. look at our baskets here. Dimensions • Width: 610mm • Depth: 680mm • Height: 1060, 1460 or 1700mm Specifications • Modular style hook trolleys ...

ALVI storage rack 3430 QR cupboard truck for ISO Norm containers has 100 mm diam. wheels for easy movement. It measures 670 x 520 x 1385 mm externally and 600 x 400 x 100 mm recipes.

SHUTTLE for 2 sections ISO-Norm SY 5000 ON 050 Name 5000 CR External dim. 1230 x 710 x 1555 mm h Capacity 1 shuttle with 2 sections ISO oder 1 shuttle with 3 sections DIN Weight 70 kg Cupboard truck for the transport ...

HUTTLE for 2 sections ISO-Norm SY 5020 ON 050 Name 5020 CR External dim. 878 x 600 x 1180 mm h Capacity 18 containers ISO-Norm 600x400x100 mm h Weight 22 kg Shuttle for the transport of containers ISO-Nor

This trolley has a stainless steel for transferring linens and sterile items. There are three adjustable shelves inside of this and is closed on three sides with a key-lock system used for keeping it all functional. This ...

This four-wheel trolley allows for the safe transportation of a wide range of goods in a medical environment. Its 125 mm base features 3 sides. The door can be opened at a 270-degree angle, and the roof is made of wire ...

• made of stainless steel 1.4301 • designed to transport 6 (2-500-1), 9 (2-500-2) or 3 (2-500-3) sterile units • double wing doors openable on 270°, with seal and lock • two shelves inside • two maneuvering handles, along the shorter ...

The Hygieia open frame cart is a complementary solution for efficient/ergonomic handling and transportation of sterile packs, sterile goods and / OR containers, inside the CSSD or the OR Department 1. ...

SS Paper Dispensing Trolley A/B Type(JDEBB112A/B) Dimensions: L1000xW600xH860mm (A) L1400 x W725 x H860mm ( B )

SS Paper Dispensing Trolley A/B Type(JDEBB112A/B) Dimensions: L1000xW600xH860mm (A) L1400 x W725 x H860mm ( B )

SS Transport Basket Tolley JDECK112 Dimensions : L425 x W450 * H1750mm(Single Side) L425 x W800 x H1750mm(Double Side)

... rubber to prevent damage. - Breaks on both wheels. - Removable shelves. - Capacity for 6 (N-6 model) or 9 (N-9 model) sterilization units. - The N-9 model is equipped with two doors allowing an opening to 270 0.

... to the trolley with 2 stainless steel hinges, alternatively with stainless steel closing door and key lock. In case of closing door the leaf has closed-cell silicone gasket. MODELS EC-216™: Trolley ...

This trolley line was especially designed to facilitate transportation of decontamination pans and instrument containers from operating area to sterilization area.. In order to meet your needs, based ...

... convenient, modular and mobile storage of your consumables. In the operating area, these trolleys allow your operating theatres to be supplied daily. Refer to the chapter « STERILIZATION ...

DOUBLE-SIDED TROLLEYS WITH CENTRAL COMPARTMENT Trolley equipped with 4 levels of accessories on each side and a central space designed for baskets and containers with maximum dimensions of 600x300mm. 16 ...

Sterile racking, transporter and trolleys. • AISI 304 stainless steel • Fully welded base frame designs • Anodised aluminium profiles • 100mm anti-static castors • Choice of Din or ISO norms • Wide range of accessories Basket ...

Mobile stainless steel units • Anti-torsion base chassis with stainless steel tubes. • 160mm fixed, swivel and locking castors with brakes. • Pyramid roof to facilitate water drainage. • Doors can be locked in opening ...

Mobile stainless steel units • Anti-torsion base chassis with stainless steel tubes. • 160mm fixed, swivel and locking castors with brakes. • Pyramid roof to facilitate water drainage. • Doors can be locked in opening ...

... with most trolley washers/sterilisation units) Natural unpolished stainless steel (304 grade) construction One fixed central shelf, two adjustable shelves plus removable stainless steel drip tray Doors open flush against ...

... 1524mm) and 24x60 (610 x 1524mm) Units are 69" (1753mm) high, including casters. Casters must be ordered separately. Carts come standard with swedged posts and aluminum split sleeves. See Spec Sheet 52.03 for ...

Equipped with a hinged door, four rubber caps, four casters, two of them with brakes and a tubular handle to drive it. Capacity: with four pairs of inner guides (210 mm between guides) for baskets 580 mm wide. Dimensions: 670 x 640 x 1130 mm

Mobile unit for optimum accommodation of maximum 6 DIN containers. Maximum container dimensions: 300 x 300 x 600 mm Simple operation thanks to large castors

Transport trolley for transport and storage of sterile supplies in containers or baskets. Key facts With 2 solid shelves Vertical push handles 270° wing doors Circumferential door seals Product information Trolley ...

... dirt or any fluid. The surgical case carts are used to store and transport sterile packages from the hospital's Central Supply to surgery or operation room. These carts can be manufactured based on the ...