Tables with sink

... water towards the drain. Each table has a sink with hot and cold water mixer, and the structure is made entirely of stainless steel suitably reinforced to withstand the load of the body. Stainless ...

CEATC02 Elevating and rotating (90°) autopsy table Autopsy table with adjustable height and rotating system 90°, completely stainless steel AISI 304, properly reinforced and shaped in order to make ...

... inclined and without sharp edges, with a particular slope that allow a smooth flow of the water towards the drain. Each table has a sink with hot and cold water mixer, and the structure is made entirely ...

The down-draft grossing table is equipped with air down draft system. This specialized work table guarantees a laboratory environment free of pollutants while slicing and preparing histological slide ...

The autopsy table is mounted on a center support column and can be rotated to the right and the left by approx. 180°; moreover, it is height-adjustable from 750 to 1000 mm. The autopsy table is completely ...

The autopsy table is mounted on a center support column and is height-adjustable in the from 750 to 1000 mm. The autopsy table is completely made of stainless steel (material no. 1.4301- ANSI 304). The ...

Autopsy table completely made of stainless steel AISI 304, material thickness 1,5 mm. Foundation with vertically controlled floor legs. Table top with sound attenuating foam-insulation and negative ...

Autopsy table completely made of stainless steel AISI 304, material thickness 1,5 mm Table top  Sound attenuating foam-insulation and negative diagonal folds to the drain  Bottom of the table ...

Table top  4 removable perforated dissecting plates (material thickness 2 mm, holes Ø 20 mm)  Large suction area (750 x 2000 mm) with built-in sprinkler-system (with stop valve) for continuous circular table ...

... adjustable Feet StructureCompletely in stainless steel; work surface with a high, profiled surround and a seamlessly welded basin. Table carrying capacity: max. 200 kg. Basin cm 40 x 50 x 20 (W/D/H) Weight110 kg

... Structure Completely in stainless steel, the Autopsy table is mounted on a center support column. The work surface features a high, profiled surround and a seamlessly welded basin is affixed to the end of the table, ...

... the Autopsy table is mounted on a center support column and can be rotated to the right and the left by aproximately 180°. The work surface features a high, profiled surround and a seamlessly welded basin is affixed to ...

PuSiCo is an elegant and minimal washbasin and changing table made of scratch-resistant acrylic stone, velvety and warm to the touch. It has rounded edges in order to facilitate both safety and cleaning. Leura s.r.l. ...

... of superior quality autopsy/dissection tables. We custom design, manufacture and install everything that you will need for a modern, fully functional cadaver dissection room. All of our autopsy/dissection tables ...

... of superior quality autopsy/dissection tables. We custom design, manufacture and install everything that you will need for a modern, fully functional cadaver dissection room. All of our autopsy/dissection tables ...

... of superior quality autopsy/dissection tables. We custom design, manufacture and install everything that you will need for a modern, fully functional cadaver dissection room. All of our autopsy/dissection tables ...

33316-F-304 - Autopsie table -DELTA 6 feet Details Autopsie table -DELTA 6 feet

Details Autopsie Table -DELTA EVOLUTION II- Inox 316

80042-F - Table for dissection tray Details Based with service door and IP 55 waterproof plug

... (76.2cm) Wide x 37" (93.9cm) High ■Ail stainless Steel construction ■Right approach sink ■Total down draft system's inner chamber has drain sink ■Large wash sink: 12" (30.4cm) x 12" ...

Dissecting Table - Vented Right Hand Sink ■Overall Dimensions: 48" (121.9cm) Long x 30" (76.2cm) Wide x 50" (127cm) High ■Ail Stainless Steel Construction ■Recessed Work Area with Built-ln Postive ...

■Dimensions: 48" (121,9cm) Long x 30" (76.2cm) Wide x 50" (127cm) High ■Ail Stainless Steel Construction ■Recessed Work Area with Built-ln Positive Slope for Drainage ■Hot/Cold Water Fixture with Single Lever Mixing Valve ■Electrical ...

... dimensions: 450x450x150 mm • recessed table top • the table is equipped with a ball valve outflow • under table top, on the left side, a double wing door cabinet, 800 mm width • one ...

... 1.4301 • back edge of table upraised to 40 mm, the rest of edges are recessed • bay with plastic siphon on the right side of the table top; dimensions: 400 x 400 x 250 mm • masking frame in front under ...

... of stainless steel 1.4301 • back edge of table upraised to 40 mm, the rest of edges are recessed • bay with plastic siphon on the right side of the table top; dimensions: 400 x 400 x 250 mm • under ...

Made of stainless steel 304; Include doors; Worktop: 60x60x85 cm; Sink: 40x40x25 cm.

... powder-varnished (colours consistent with RAL palette) top of module A (bathtub), U (washbasin) i B (nursing table) made of glass-polyester laminate nursing table with mattress Standard: stand-alone ...

... both sides top of module A (bathtub), U (washbasin) i B (nursing table) made of glass-polyester laminate, top of module C (treatment table) made of chipboard nursing table and treatment ...

... laminated on both sides top of module A (bathtub), U (washbasin) i B (nursing table) and C (treatment table) made of glass-polyester laminate nursing table and treatment table ...

Scientek custom manufactures various models of autopsy tables to suit your specifications.

Scientek custom manufactures various models of autopsy tables to suit your specifications.

Scientek custom manufactures various models of autopsy tables to suit your specifications.

... AISI 304 satin finish, dimensions (LXWXH) 280x80x80, n1 sink (LXWXH) 50x40x25, sewage collection tank corpse with washing system, plan rests body edging hcm1,5 composed n5 sectors removable. Sink (LXWXH) ...

... or expulsion. Sink (LXWXH) 50x40x25, mixer with hand shower, faucet to wash by sprinkler tank wastewater collection cadaverous, n1 mixer with hand shower on base, sink garbage disposals, n2 watertight ...

Structure in stainless steel AISI 304 satin finish, dimensions (LXWXH) 280x80x80, n1 sink (LXWXH) 50x40x25, sewage collection tank corpse with washing system, plan rests body edging hcm1,5 composed n5 sectors removable, ...

Excellent for gross dissection or dissection of small animals, ThermoScientific™ Shandon™ DU-11 Downdraft Necropsy/Dissection Table is designed as a multi-use laboratory workstation. Its compact dimensions allow it to ...

... building ventilation system. Additional equipment: macerator built-in the autopsy table, organ table (N4-901), instrument table (N4-902), and hydro aspirator on the table ...

... standalone unit with services contained in the pedestal, or can be docked with a stub column which offers a convenient work table whilst housing all services, power, drain, water, air, and spray facilities. The fixed ...

The AFOS Ventilated Specimen Table range is designed for the cutting and preparation of histology specimens. Protects the pathologist from hazardous formalin and chemical vapours, independently measured to contain formalin ...

... mm from 650 to 1000 mm. Overview Wallhung changing table with sanitary appliances, 800 mm x 1400 mm, with electric motor with hand control, incl. transformer. Incl. safety stop, integrated sink, tap, ...

MA-0974 Docking Autopsy Table (mobile) with Perforated Workarea and Sidewall - Downdraft ExtractionDescription and Features Docking Autopsy Table, mobile design With perforated work area, „Double Slot“-Downdraft ...

... stainless steel designed to be used in operating rooms, polyclinics and laboratories by considering user’s requests • Plaster sink, cabinet and 3 drawers • 2” reservoir valve • Adjustable 6 legs • Dimensions (WxLxH) : 600x1600x850 mm

... ) • Height set at 35.5 inches (90.2 cm) • Easy access for cleaning under the table • Sanitary, Adjustable Stainless Steel Flanged Type Bullet Feet • Full-width, integral sink (14 inches long by 20 inches ...

All type 304 stainless steel construction with a No. 4 finish. Heliarc-welded seams and joints, ground and polished to match adjoining surfaces. Radii on all inside and outside corners for easy cleaning. Plumbing and electrical lines ...

The unit has an elegantly curved shape and multiple finishing options, which allows easy installation into the playroom and surveillance of other children whilst in operation. Bath can be sized to suit the age range of children cared ...

... box (400m3/h) - 2 jacks allowing a height adjustment of the table (from 73 cm to maximum 103 cm) via a remote control – Set of 3 Body supports - Sink 40 X 40 X 20 cm (heigh) – Hot and cold Mixer tap ...

Designed for connection to modular, compact and conveyor belt dishwashers.