Titanium implant abutments

... Pre-milled abutment Blanks. The new Titanium Pre-Milled abutment blanks are one piece customized titanium abutments with your in-house milling equipment. Abutment ...

Implant diameter: 3.3, 4.1, 5 mm
Implant length: 2, 3, 4 mm

Implant diameter: 4, 5, 6.5, 3, 3.5 mm
Implant length: 5, 6.5, 8, 10 mm
Implant angulation: 25, 15 °

... superstructure solutions of Shorter Implant systems; There are shouldere abutment, non shouldered abutment, multi abutment, octa abutment,fixed detachable abutment, ...

Implant length: 18.85 mm

... anchoring system. HEXAGON Allows tightening of the interface connector to the implant. CIRCULAR SUPPORT BASE With a diameter of 6 mm or 4.5 mm (depending on the chosen abutment model), and where the prosthetic ...

Implant diameter: 4.5 mm
Implant length: 7, 5 mm

Implant diameter: 3.5, 4.5, 5.5, 6.5 mm

... research. Implantswiss follows the latest trends and initiates extensive and contemporary projects that may lead the future of implant dentistry. Implantswiss products are manufactured with the state-of-the-arts technologies and high ...

Implant diameter: 3.75, 5 mm
Implant length: 0.5 mm - 7 mm

... BALL ATTACHMENTMSI France Ball Attachments are made of Titanium alloy grade 5 and available in different heights ranging from 0.5 mm to 7 mm.The height is selected according to the height of gums. Snap structure of MSI France Ball Attachments ...

Implant diameter: 4.1 mm
Implant length: 10.6, 11.6, 12.6 mm

... time without screw loosening, implant fracture or other mechanical failures. Fortunately, recent advances in implant surface, connection technology and overall architecture have enabled the development of a dental ...

... Made of titanium grade 5 ELI.Their grooves allow for the vertical embedding of any restoration material. It also has the SelectGrip® treated surface to improve its retention capacity.Models are available for most of the implant ...

Implant length: 2 mm - 3 mm
Implant angulation: 17 °

... 2 / 3 mm Material: Titanium TI-6AL-4V ELI Package Includes: 17° Angular Multi Unit Titanium Abutment Multi Unit Holder Screw for Multi Unit ...

Implant diameter: 4, 5, 3, 3.4 mm
Implant length: 4.5, 0.5, 2.5, 0.7 mm
Implant angulation: 15, 20, 0 °

... Medical Instinct® Esthetic Abutments for classic crown- and bridge construction, 0°, Ø 3.0/3.4/4.0/5.0 mm, GH 0.5/2.5/4.5 mm BoneTrust® Esthetic Abutments – for the classic crown and bridge technique – are available ...

Implant angulation: 0, 15, 25 °

... SHOULDERLESS ABUTMENTS, OF CONICAL SHAPE, FOR VERTICAL PREPARATIONS WINSIX® Shoulderless Abutments allow for an easier relining and finishing, both of the temporary and of the definitive abutment, ...

Implant diameter: 4 mm - 6.5 mm

... An abutment combined with a set screw, for a bridge prosthesis Using a 1.2 Hex Driver Fastening torque : Narrow 20Ncm Regular / Wide 30Ncm Protect cap is optional ...

Implant diameter: 3.5 mm

... Titanium abutments for a temporary tooth I Non rotational 0 3,5 mm + retaining screw P/N 1414 APPH35 Rotational 0 3,5 mm + retaining screw P/N 1414 APPR35 Since 25 years, IDI firm ( Implants Diffusion ...

... Z2Plus® multifunction abutment The Z2Plus® multifunction abutment can be used not only as an implant carrier but also as an impression abutment for the closed tray technique and as a ...

Implant diameter: 3.75 mm
Implant length: 9.5 mm

Implant length: 2, 3, 4 mm
Implant angulation: 17, 30, 45, 52, 60 °

... The Multi-Unit system provides a solution for screw-retained prostheses; even on complicated-to-restore implants (for example, multiple tilted implants). The Multi-Unit system comprises a full range of sizes for both ...

Implant diameter: 3.8, 4.2 mm
Implant length: 8.5 mm - 11.5 mm

... Our wide variety of straight abutments remain stable even when their wall thickness is reduced to 0.1 mm. They are suitable for use in multiple scenarios, for example, single crowns, bridges and the fabrication of cement-retained restorations, ...

Implant diameter: 4.13 mm
Implant length: 4.6, 6.1, 7.6 mm

... consideration for the modeling of soft tissues and the choice of the LEM abutment. All LEM abutments should be inserted with 45Ncm torque for bridges and extended work. 65Ncm for single implants. ...

Implant diameter: 3.75 mm
Implant length: 0.5 mm - 6 mm

... structure connected by a click to the removable denture. The abutment is available in different heights – 0.5,1,2,3,4,5,6mm – selected according to the height of gums. The snap abutment is designed with a titanuim ...

... Resolves unsuitable implant positioning in the front sector, allowing – the creation of cement-retained prostheses with a high aesthetic result thanks to the 45° angle. It is an excellent prosthetic solution if it is not possible to perform ...

Implant diameter: 4.1 mm

... Bone Level Straight Abutments are designed to be extended through the thickness of gingival tissue and into the oral cavity. Straight abutments can be directly fastened into the implant. They are available ...

... Temporary Abutment Engaging VINH0601 Non-Engaging VINH0602 Categories: Prosthetic components, Screw Retained Vulkan® is a modern, cutting-edge European dental implant brand, established in Barcelona (Spain) in 2013. Vulkan® ...

Implant diameter: 4, 6.5, 5 mm
Implant length: 2, 1, 4, 3, 5 mm

... All our abutments are systematically delivered with the transfixation screw (KVP). The laboratory screw (KVPL) is offered on demand. The KVP screw must not be used by the laboratory. There is not 1mm lenght for the 6.5mm diameter abutment. ...

Implant length: 8, 9 mm

... aesthetic final abutment is based on a reverse crown/concave profile, in order to ensure that clinicians obtain the highest aesthetic results. Ranging from narrow to wide with different angles and gingiva heights, TAG’s aesthetic abutments ...