- Medical Consumables >
- Medical clothing >
- Type IIR surgical mask
Type IIR surgical masks
... Product Name: face mask Material: PP, melt-blow filter Fabric Weight: 2ply(20gsm+22gsm) . ...
... Disposable Type II and type IIR surgical masks ...
... Its function is to reduce the transmission of particles and infectious agents, to prevent infection of microorganisms present in small respiratory particles, when coughing or sneezing. It has a bacterial filtration efficiency equal to or greater than ...
Length of unfolded mask: 175 mm
Width of unfolded mask: 95 mm
... SUBMED Masks are designed according to international Bacterial Filtration Effiency levels. They ensure high comfort in breathing while reduce the transfer of particles. SUBMED Masks are available in various colour for ...
... The Unigloves Profil Plus face mask can be used in the medical sector as well as in private areas. It is also safe thanks to the tested EN 14683 standard . 98% protection against bacteria, both for the user and the environment. The flexible ...
... • 25gsm filtration • Highly breathable • 3 Ply non-woven fabric • Lightweight and comfortable • Full width adjustable nose piece • Hypoallergenic >98% Bacterial Filtration Efficiency (B.F.E) ...
... Elastic Earloop bands help hold a surgical mask in place while you’re wearing it. These can also be looped behind your ears or tied behind your head. Type IIR surgical ...
... Filtration Efficiency) filtration capacity of the mask is over 98%. Place the mask with clean hands on the face patterned side outwards and metallic strip on the nose. Pull the loops over your ears. Unfold the mask ...
Lifa Air
Length of unfolded mask: 17.5 cm
Width of unfolded mask: 9.5 cm
... Single-use surgical mask manufactured at our plant located in Poggio Rusco (MN) Italy, in ISO 8 class clean room. Raw materials used are produced by Italian firms, therefore surgical mask ...
... The O2MED SURGICAL MASKS project conceived by 1Flex Technology was born with the aim of producing medical devices with very high quality standards following the pandemic crisis generated by COVID-19 with the desire to ...
1Flex Technology
Length of unfolded mask: 16 cm
Width of unfolded mask: 18 cm
Length of folded mask: 10 cm
... efficiency. The mask may be worn for up to 12 hours. The nano filter, unlike ordinary medical masks, does not lose efficiency even through gradual moisturizing (with exhaled water vapours). NANO MED CLEAN masks ...
... the best fit • Elasticated soft ear loops, Splash resistant • Non-sterile face mask, Secure and comfortable fit • Light, soft, and skin-friendly single-use mask • Does not obstruct breath ...
... The Panther® Surgical Face Mask Type IIR KWE series with ear loops fastening allows a comfortable fit. A stable nose clip tightly seals the area around the nose. The high filter performance ...
Panther Healthcare
... resistant. This mask is ideal for a dentist. The RIVM advises to use this type of mask for general care activities, also for patients with the corona virus. However, since the coronavirus spreads through ...
Xiantao Yuanjie Nonwoven Products
... Bacterial Filtration Efficiency BFE ≥ 99% With aluminum, flexible tip ...
Length of unfolded mask: 17.5 cm
Width of unfolded mask: 9.5 cm
The anatomically adjustable nose bridge and elastic ear loops create a physical barrier between the mouth and nose of the wearer and potential contaminants in the immediate environment through 3 layers of high-quality, skin friendly PP material.
... or heavy metals. The masks are also resistant to UV radiation. Thanks to the internal filter layer with a minimum filtration degree of BFE ≥ 98% of biological aerosols, they protect against droplet-borne infections. The masks ...
... coated to avoid possible chafing Long, strong polypropylene straps to ensure correct positioning Easy breathing: the mask is made of a highly protective material with low breathing resistance High resistance to tearing as all ...
Length of unfolded mask: 178 mm
Width of unfolded mask: 300 mm
... LAYER FABRIC DOUBLE NOSE WIRE FOR CLOSE FIT Type IIR fluid resistant face mask manufactured from 3 ply protective fabric with integrated optically clear visor for maximum visibility. The Type ...
Tecman Advanced Healthcare Products
... and filter in the middle layer with MELTBLOWN 25 gr. EN 14683:2019 + AC:2019 5.2.2, 5.2.3, 5.2.4 , 5.2.5 Sanitary product Type I Authorized by medical Spanish authorities AEMPS nº 613-20-AE This product is intended for use by ...
... by healthcare professionals, these Type IIR 4-ply face masks offer 4 layers of protection whilst allowing the wearer to breath easily and naturally. With an adjustable nose clip and elasticated ear ...
... DESCRIPTION Type IIR 3-ply blue surgical mask: spunbond 30 gsm; meltblown 25 gsm; spunbond 30 gsm; ultrasonically welded polypropylene elastic; bacterial filtration efficiency (BFE) ...
... Medical Face Mask 3-layer type IIR Wearing a medical mask has always been one of the recommended protection measures applicable in various settings: in hospital or clinic surroundings, ...
Length of unfolded mask: 175 mm
Width of unfolded mask: 93 mm
... Storage The face mask shall maintain its properties whilst in a closed pack and stored in a cool dry condition. Shelf Life The face mask shall have a shelf life of 5 years from the date of manufacture based on the ...
Top Glove
the best suppliers
Subscribe to our newsletter
Receive monthly updates on this section.
Please refer to our Privacy Policy for details on how MedicalExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group