The Ackuretta Diplo
The Ackuretta Diplo is a professional-grade 3D printer that offers high resolution, an open material platform, and maximized productivity for direct manufacturing applications across many markets.
The Diplo is an industrial-scale DLP 3D printer
with a dual-area build platform to quickly and
efficiently make two prints side-by-side. With
Ackuretta’s Intelligent Pressure Sensor Technology
(IPST) system, the Diplo prints faster and more
accurately than conventional DLP printers, and
with Wi-Fi connectivity, you can start, pause, and
monitor your prints anytime or anyplace.
The Diplo comes shipped with one build platform, one vat, and the Wi-Fi dongle attached. Depending on your purchase,
one more build platform and vat may be boxed in the Diplo package.* Bottles of resin and finishing kit tools are only stored in the Diplo package if purchased.Lift the top box upward. This box is just a protective shell
that envelops the other boxes.Remove the side box. Inside this box are any additional
vats or build platforms that you purchased. If you did
not purchase any additional vats or build platforms, this
box is empty. • Keep your Diplo in a dry, temperature-controlled room around 25° C (77° F).
• Resins become more viscous when they are too cold. If the environment is around 15° C (59° F),
Ackuretta recommends increasing all curing times by 15%. Even colder temperatures may require
increasing curing times further or may cause print failures.
• Similarly, resins may become very thin in hot temperatures. If the environment is hotter than
35° C (95° F), resins may overcure or may melt during the print process.