Infant warmer on casters Neolite

with APGAR timer

The Neolite Infant Warmer features two control modes: manual control and skin temperature servo-control The Neolite Infant Warmer also lets you: Simultaneously monitor the set temperature and the skin temperature Easily adjust the horizontal angle of the radiator and the inclination of the infant bed Folding panels provide convenient access to the infant Features Touch switch panel for setting temperature and real temperature APGAR timer Heating power rate indicates 0-100% Multi-function self-checking alarms X-ray cassette located under bed RS232 connector Data output Standard configuration includes: Radiation head Temperature controller Skin temperature sensor Bed temperature sensor Infant bed and bed deck I.V. pole Tray and stand SPECIFICATIONS General Power Supply: AC110V - 240V/50-60HZ Power Input: 700VA Temperature Control Range: 25° C – 37° C Sensor Precision: ≤0.3° C Uniformity of Bed Temperature: ≤2.0° C Adjustment Angle for the Radiation Head: 0°, 30°, 60° Inclination of Infant Bed: ±15° APGAR Timer: Sound indications at 1 min., 5 min., 10 min. Alarming Audible and Visible Alarm: Indicates the real temperature and cuts off the power supply of heater when necessary Over-Temp Alarm: Sounds when skin temperature is >39.5° C Deviation Alarm: Indicates when the temperature deviates from the setting temperature by ±1° C Sensor Alarm: When the sensor is disconnected, open circuit, short circuit or put on the outside of bed Power Failure Alarm: Sounds when the unit is turned on but there is no power or if the power cord is disconnected System Alarm: Sounds when there is a system malfunction inside the temperature controller