Fluorescence spectrometer light source AvaLight-XE

xenoncompactcontinuous

The AvaLight-XE is a pulsed xenon light source, perfect for ultraviolet applications like fluorescence. When connected to your AvaSpec spectrometer through the IC-DB26-2 cable (sold separately), the flashes are synchronized with the data collected by the spectrometer. The number of flashes per scan can be selected in AvaSoft. With a special DUV bulb, the AvaLight-XE can be used for deep-ultraviolet applications (below 200 nm). A special direct-attach cuvette holder is available for your fluorescence applications. For transmission measurements, the AvaLight-XE can be used in conjunction with the CUV-ATT-DA, which has an iris attenuator to limit the light output and avoid saturation. Benefits Pulsed light source Perfect for fluorescence Direct-attach cuvette holders available Long lifetime Product Information Spectral output - 200-1000 nm Total optical power output - 39 µJ per pulse (average 66 mW) Optical power in 200 µm fiber - 0.66 µJ per pulse (average 20 µW) Optical power in 600 µm fiber - 3.2 µJ per pulse (average 320 µW) Optical power in 1000 µm fiber - 7.4 µJ per pulse (average 744 µW) Synchronization input - 15 pin sub-D connector, TTL level Pulse duration - 5 µs (at 1/3 height) Pulse delay - 6 µs Pulse rate (max.) - 100 Hz Bulb life - Min. 10 9 pulses Connector - SMA-905 connector Power requirement - 12 VDC/550 mA Dimensions, weight - 175 x 110 x 44 mm, 540 g