ECG patient monitor CETUS x15

ECG patient monitor
ECG patient monitor
ECG patient monitor
Add to favorites
Compare this product


Measured parameter
ECG, RESP, TEMP, etCO2, cardiac output, NIBP, IBP, BIS, SpO2, NMT
intensive care, hemodynamic
Options and accessories
wireless, with touchscreen, USB
Screen size

15.6 in


Multi-Parameter Critical Care Monitor for all Patient Categories 10 waveform display, up to 12-lead ECG analysis Useful calculation (Hemodynamic, Drug Dose, Oxygenation, Ventilation) Pacemaker detection ST & arrhythmia analysis SpO2 support PVI and PI, low perfusion 0.2% BISx module, NMT module optional Wired/Wireless CMS, support HL7 protocol to HIS SpO2 pulse-tone modulation (Pitch Tone) VGA support external display Graphical & tabular trend review (120 hours) 48 hours full disclosure wave review for each patient Configuration: ECG, Analog SpO2, NIBP, 2x TEMP, PR, RESP, Li-ion battery Optional: Touch-Screen, 12-lead ECG, Digital or Masimo SpO2, 2/4/6 IBP, Cardiac Output, EtCO2 Analyzer, Multi-Gas Analyzer, BIS, NMT, HDMI, Thermal Recorder, Wired/Wireless CMS Technical Specifications Display 15.6” TFT (touch screen optional) Resolution: 1366 x 768 Number of traces: 10 waveforms I/O LAN: 1 standard RJ45 port WLAN: IEEE 802.11b/g/n USB: 2 USB connectors VGA: 1 VGA monitor connector (option) Output: 1 connector for Nurse call, Defib Sync Analog Output (options) ECG Lead type: 3-lead, 5-lead,12-lead ECG waveform: 2 channels, 7 channels, 12 channels Display sensitivity: 2.5 mm/mV (×0.25), 5 mm/mV (×0.5), 10 mm/mV (×1.0), 20 mm/mV (×2.0) Wave sweep speed: 6.25 mm/s, 12.5 mm/s, 25 mm/s, 50 mm/s Bandwidth Diagnostic mode: 0.05 Hz~100 Hz Monitor mode: 0.5 Hz~40 Hz Surgery mode: 1 Hz~20 Hz Strong filter mode: 5Hz~20 Hz CMRR>100 dB Notch: 50/60 Hz notch filter can be set to on or off Differential input impedance >5MΩ Electrode polarization voltage range: ±400mV Baseline recovery time <3s after defibrillation
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.