Medical instrument packing table top SET -LO-0010-024

The implants described may only be used in combination with Bäramed products! OSTEOSYNTHESIS – TITANIUM IMPLANTS (Bone: Plates / Screws / Pins / Wires / Staples ) non-sterile IMPLANT MATERIAL: Implants made from titanium in accordance with ISO 5832-2 unalloyed Titanium; ISO 5832 – 3 Ti6A14V alloy ; ISO 5832 – 11 Ti6Al7Ni alloy manufactured by Bäramed.The surface of these implants is chemically passive: not magnetic. These implants can be combined with the standardised material provided that its composition lies within the analysis stipulated in the ISO 5832- 2 / ISO 5832-3 / ISO 5832-11 standard and the required specifications.The material wrought unalloyed titanium and alloyed titanium, is biocompatible and prevents a so-called chrome-nickel allergy by its nature We would point out that implants only f unction correctly if the following basic rules are observed: When selecting implants (bone: plates / screws / pins wires / clips), care must be taken to choose the appropriate implants on the basis of the weight and level of activity of the patient, and the bone fracture to be treated. Extreme deformation of the implants must be avoided; the cautious bending of wires, plates and pins does not, however, lead to implant damage provided it is done with sufficient care. Repeated deformation should be avoided at all costs as it will fatigue the implant material. The re-use of implants is absolutely forbidden (single use). We strongly advise you to inform patients of the advantages and disadvantages of implants.