Embedding system cooling module BCP230

Cryo module used to obtain the rapid cooling of histological samples included in paraffin. Structural Features  Painted sheet steel chassis.  Large stainless steel surface that offers space for storage of up to 300 paraffin blocks, placed in vertical position.  Provided with plexiglass transparent cover and 48 mm high edge, where is concentrated most of the cooling power, to obtain a refrigerated chamber and not only a cold supporting plane.  Cooling system by compressed cycle without CFC. Refrigerant R290 28 grams. Technical Features Working: Temperature: Power switch button ON/OFF. Working Temperature fixed at -20°C (with top cover). Installation Place the instrument on a stable vibration-free laboratory table with horizontal, flat table top, as far as possible vibration-free ground. Connect the plug of the power cord to the connection socket on the rear of the instrument. Plug the power cord using the cable supplied into the wall outlet (230V~ 50/60Hz). Do not use extension cords or adapters and do not modify the cable supplied. Warning and precautions Product classification The product is intended for professional laboratory use for healthcare professionals. Recommendations In the event of a serious accident, we recommend that you immediately inform Bio-Optica Milano S.p.A and the competent authorities Other Connections Water connections Not necessary Fumes aspiration/filtration Not necessary Electrical connections Power Supply 230 V Frequency 50 ÷ 60 Hz Power 0,6 kW Fuses 2 fuses of 6.3 Ampere - 5x20 mm – T6.3AH250V