Electric analyzer R7000

calibrationfor medical applicationsbenchtop

The R7000 Electrical Receptacle Analyzer enables compliance and promotes safety while dramatically reducing time spent testing and generating required reports. The R7000 Electrical Receptacle Analyzer helps healthcare facilities meet CMS and National Fire and Protection Agency (NFPA) 99 compliance, saving time and money. It performs up to 12 tests per receptacle, automatically generating NFPA-compliant reports. Featuring a large touchscreen display and preloading capabilities, it simplifies data entry and documentation. The detachable reference cord allows flexible testing, while the Report Commander™ software creates formatted reports. With storage for up to 10,000 test results, the R7000 reduces testing time, cuts costs and ensures safety compliance. Quantity 1 Who Should Use This Product Professional Use Only It performs and automatically generates reports on the following: Standard “OKX” Test to Check Receptacle Wiring Polarity Isolated Power Wiring Line Voltage Phase Relationship between Receptacles Neutral to Ground Voltage Neutral to Ground Resistance Ground to Ground Voltage Ground to Ground Resistance Contact Tension (Gripping Force) of Hot, Neutral and Ground Prongs The coin cell battery inside of your unit needs to be changed. It is replaced during every calibration. If this occurs, the analyzer may be due for calibration. The analyzer should be sent it for the battery to be changed. Bionix does not recommend trying to change it in the field. There are ribbon cables that attach from the LCD screen to the circuit board. If they rip off, that will cause more damage. Connect the charging cable and let the analyzer sit for one hour.