Arthroscopy shaver blade FWS-WJ-005A

Arthroscopy shaver blade - FWS-WJ-005A - Chongqing FWS Medical Device
Arthroscopy shaver blade - FWS-WJ-005A - Chongqing FWS Medical Device
Add to favorites
Compare this product

Characteristics

Applications
for arthroscopy

Description

Product Summary:

Disposable Sterile Arthroscopic Shaver is a kind of equipment consumable for rotary cutting. It can be used to remove soft tissue and bone under arthroscope and endoscopy. The resected tissue can be sucked out from the surgical site through an aspirator in the blade head.


Instructions:

  • Anesthetize and clean the skin.
  • According to different joints and surgical purposes, puncture with a perfusion suction needle at a specific part of the joint and reach the designated position.
  • Inject proper amount of saline to bulge the joint cavity or other surgical areas.
  • Choose the appropriate approach according to different joints and indications, insert the arthroscopy to the designated position, and observe the lesion or tissue state.
  • Disassemble the disposable sterile arthroscopy planer in a clean environment. When inserting the planer, adjust the direction of the handle until the button A on the planer is aligned with the handle groove. Insert the planer into the handle so that the button enters the slot. The button should be pushed as close as possible to formally lock it.
  • According to different joints and indications, choose the correct approach to insert the planer.
  • Align the cutting edge of the planer to the lesions that need to be planed, or to be planed appropriately according to the needs of the operation.
  • When removing the planer, press the button A on the planer with your thumb or fingertip, which will separate the planer seat from the drive shaft, and remove the planer from the handle.


Characteristics / Technical Specifications:

  • Disposable, sterile, rotary cutting shaver for arthroscopic and endoscopic procedures
  • Removes soft tissue and bone
  • Compatible with POWERMAX ELITE 72200617 pedal handle
  • Stainless steel construction with corrosion resistance
  • Hardness of cutter head materials: ≥300HV1.0
  • Surface roughness Ra (inner/outer cutter): ≤0.8μm; at cutting edge: ≤1.6μm
  • Firm connection: withstands 100N static tension for 30s
  • Locking: withstands 15N static tension for 30s
  • Residual ethylene oxide: ≤0.6mg/set
  • Sterilized by ethylene oxide

Catalogs

No catalogs are available for this product.

See all of Chongqing FWS Medical Device‘s catalogs

Exhibitions

Meet this supplier at the following exhibition(s):

RCOST
RCOST

22-24 Oct 2026 Pattaya (Thailand)

  • More information
    SBOT
    SBOT

    18-20 Nov 2026 Goiânia (Brazil)

  • More information
    *Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.