CO2 laboratory incubator / floor-standing / mobile / water jacket
Max.: 50 °C (122 °F)
Min.: 5 °C (41 °F)
40 l, 180 l (10.6 gal)
Based on our accumulated experience over a long time, we are developing various products, such as
small CO incubators, large CO incubators, incubator-applied multifunctional CO incubators, etc., and have abundant
technical ability and design infrastructure.
The chamber(interior) material is made of stainless steel(SUS 304), and the body(exterior) material
is made of steel plates(Cr 41) painted with liquid powder to prevent corrosion.
The door is equipped with silicone packing to minimize the injection of exterior air into the interior,
and is equipped with an inside door fabricated of tempered glass to observe the inside easily.
The inside of the chamber is equipped with shelves of adjustable height to put experiment
objects on in multiple tiers.
The inside is equipped with circulation fans to minimize temperature deviations inside the chamber.
This uses our independently designed P.I.D method to maintain exact temperature at 99.9% or
higher accuracy, minimizing temperature changes.
The water jacket system is a water type system to insert water of high specific heat into a
CO2 incubator chamber jacket with a view to maintaining its temperature.
-Application of a 240 x 64 graphic LCD display of excellent visibility.
-Change of font size in the PV value depending on set menus.
-Application of a PID controller.
-Application of a round corner facilitating contamination
prevention and cleaning.
-Application of a non-dispersive dual beam IR sensor.
-Low gas leakage due to packing.
-Application of a durable O2-medical sensor.
-Application of a multifunctional alarm warning device and
an over-heating prevention element.