STRIP READER is an one channel photometer able to read strips with 8/12 wells or part of them. Mono and bi-chromatic reading system. Designed according to the most sophisticated technologies it turns out to be of top quality and reliability, as of high precision and simple to use as well. By its powerful software it is able to process and store readings and data.
Light source - tungsten lamp, automatically underpowered in Stand-by position
Optical filters - 405, 450, 492, 630 nm; 3 more on request (7 filters max, 400-700nm)
Detector - silicon photodiode
Reading system - mono and bichromatic reading
Inaccuracy
± 1% from 0.000 to 1.500 OD
± 2% from 1.500 to 3.000 OD
Reading time
36s to perform a monochromatic reading on a 8 wells strip; 56s for bichromatic reading.
52s to perform a monochromatic reading on a 12 wells strip; 75s for bichromatic reading.
Calculation Mode - OD, direct Cut-Off or calculated, single calibrator, programmable curves from 2 to 7 points
Curves - plotting of the calibration points
Memory capacity - 100 tests
Calendar/Timer - associates time with the results; timer function
Cuvettes - micro strip with 8/12 wells
LCD-Display - 2 lines with 16 columns
Printer - 20 columns on thermal paper
Keyboard - 17 buttons
Interface - RS232 serial port
Power requirements - 230/115 VAC, 50-60 Hz, 25 W
Measurements - cm 34 x 27 x 12 h
Weight - 5,4 Kg