Dentalis T3 Implant
Dentalis T3 is a tapered two-piece implant with dual thread technology, which allows a moderate insertion rate. Its thread design enables vertical condensation of the bone with dual spiral channels and domed apex. This implant features horizontal grooves produced by micro-machining; these horizontal grooves impede epithelial down growth on titanium implants.
Micro threads provide enhanced initial stability and increase contact area to the crestal bone, which promotes osseointegration at the crestal bone level to reduce platform switching.
The Dentalis T3 enables adaptation of the gingival tissues to the abutment, and has become the preferred implants of clinicians worldwide, especially in the case of immediate implant placement after tooth extraction.
With this design, the Dentalis T3 is extremely advantageous, particularly on bone type 4, where primary stability is difficult to achieve. With the BAS™ surface, Dentalis T3 is able to form a strong bond between the implant surface and the surrounding bone.
The Dentalis T3 is a self-drilling, self-tapping product, featuring anatomic design to optimize the bone compaction effect, improve bone density, and provide better primary stability.
The Dentalis T3 is available with diameters of 3.75, 4.2, 4.7, 5 mm, and lengths ranging from 8 to 16mm.
Surface roughness is achieved from “grit-blasting,” using a unique combination of the HA particles (soluble) with different sizes of grains.This process creates optimal structural roughness on the surface the surfaceand enables the incorporation of biocompatible particles (such as HA and TCP).