video corpo

Tibia compression plate LCP™

tibia compression plate
tibia compression plate
tibia compression plate
Add to favorites
Compare this product


Part of bone


3.5 mm LCP® Proximal Tibia Plate The 3.5 mm LCP Proximal Tibia Plates have a limited-contact profile. The head and neck portions of the plates accept 3.5 mm StarDrive™ Recess Locking Screws. The screw hole pattern allows a raft of subchondral locking screws to buttress and maintain reduction of the articular surface. This provides resistance to local depression loads in addition to the stability of the fixed angle construct created by locking the screws into the plate. The Synthes 3.5 mm LCP Proximal Tibia Plate and 3.5 mm LCP Proximal Tibia Plate, Low Bend are part of the Locking Compression Plate (LCP) System, which merges locking screw technology with conventional plating techniques. The Locking Compression Plate (LCP) has Combi-holes in the plate shaft which combine a dynamic compression unit (DCU) hole with a locking screw hole. The Combi-hole provides flexibility of axial compression and locking capability throughout the length of the plate shaft. Features & Benefits Available in left and right plates. Plates available in implant-quality 316L stainless steel or commercially pure (CP) titanium. Plate head Anatomically contoured to match the lateral proximal tibia Four convergent threaded screwholes accept 3.5 mm StarDriveRecessLocking Screws Three 2.0 mm holes for preliminary fixation with K-wires, or meniscal repair with sutures Plate shaft Available with 4, 6, 8, 10, 12, 14 or 16 screw holes The three locking holes distal to the plate head accept 3.5 mm StarDrive Recess Locking Screws to secure plate position. The screw hole angles allow the locking screws to converge with three of the four locking screws in the plate head to support medial fragments.


24 Pages

Other Depuy Synthes products


*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.