Hot water boiler GEOTHERM WGB (P) 3,6

GEOTHERM ® WGB (P) series boilers are designed to produce hot water. Boilers are focused on heat supply of industrial and domestic facilities. GEOTHERM ® WGB (P) series boilers are manufactured with three temperature schedules 70-95 °C; 70-110 °C; 70-150 °C. Boilers of the GEOTHERM ® VWS (P) series are produced with a capacity from 0.63 to 58.2 MW. The fundamental difference between the boilers of the GEOTHERM ® WB (P) series from the boilers of the GEOTHERM WEB(3P); GEOTHERM WEB; GEOTHERM WEB(V) series is that the exhaust gases after burning the torch of the burner immediately pass through the convective surface. Collector frame - serves for the distribution of water flows depending on the hydraulic circuit of the boiler and the connection of the boiler to the external strapping. The convective section is the main part of the boiler pipe system. The support frame serves as the base for the installation of the boiler pipe system. Stiffness belt - serves as a frame to ensure the rigidity of the boiler. The flue duct with an explosive valve - serves as a channel for the discharge of exhaust gases. This boiler works with burners from leading Russian and European manufacturers, both on natural gas and diesel fuel. Increased volume of the combustion chamber ensures complete combustion of the fuel. Convective surface of u-shaped pipes reduces the temperature of flue gases from the boiler. While high-quality thermal insulation minimizes heat loss through the boiler walls. It prevents air from entering the boiler furnace and allows the use of light thermal insulation up to 50 mm thick. With decorative lining.