Healthcare facility incinerator HURIKAN 400

for medical wastefor laboratory wastefor animal waste

SPECIFICATIONS Volume of First chamber (m3)9,5 The volume of afterburner gas (m3)10,5 Burning rate (kg/h)up to 400 Loading windowCalculated Type of fuel diesel / gas / fuel oil / waste oil The form of the incinerator HURIKAN 400 (URAGAN 400) is made of high carbon steel with a thickness of at least 12 mm., As well as steel elements, the thickness and alloy of which depends on the configuration of the model. The HURIKAN incinerator case (URAGAN) 400 does not bear thermal loads due to the use of insulation materials in a concrete lining arrangement. The metal structure of the incinerator housing is essentially a lining frame, so the thickness of the metal itself and the lining technology are not so important here. The main working element of the combustion chamber is the lining is the working surface in contact with the burning waste. The heat-resistant layer of the paint-and-lacquer coating of the case ensures the durability of the installation under the conditions of operation outside buildings and structures. The incineration chamber of the HURIKAN incinerator (URAGAN) 400 with a vertical load is made of a powerful monolithic lining of refractory concrete, the concrete mixes were developed by Eco-Spectrum and meet all the requirements for working at high temperatures. Fireproof concrete is resistant to high thermal and mechanical loads at the same time. For furnaces of the HURIKAN series (URAGAN), concrete with a working range from 1000С to 1600С is used. Concrete is not only a refractory material, but also highly conductive heat, so in the technologies for the production of linings we use an insulating material that is ideally combined in combination with concrete.