laboratory freezer / for pharmacies / hospital / cabinet
laboratory, for pharmacies, hospital
Max.: 160 l (42.3 gal)
Min.: 375 l (99.1 gal)
The outer surface of the device has been produced of galvanized sheet with electrostatic paint resistant to rust and the inner surface is produced of chrome nickel sheet.
The door of the device has double thermal glazing, it can be locked and has magnetic seal rings. Thus, it provides an opportunity to trace the stocks.
The deep freezer door section has polyurethane insulated block-door system.
There is a plastic covered wire shelves in the device that can be adjusted according to the desire of the user.
The deep freezer section has Cr-Ni shelves system.
Operates between +2/+8 degrees and it is set to +4 degrees. The deep freezer section is set at -20 C degrees.
It has LED lightening. A user-friendly digital control panel with a micro processor has been used on the device.This system can keep the data in memory for 30 days.
There is a RS 232 port that provides the transmission of the device temperature information to electronic environment if desired.
The thermostat at the control panel of the device can make measurements with 0.1 degree sensitivity.
There is an accumulator system charged automatically at the control panel of the device. This system provides that at possible electricity cut os the digital control panel and the thermal printer continue working for 72 hours.
There are two wheels with stoppers and two regular wheels on the device to provide easy portability.
The numerical and graphical printout of the data recorded with the thermal
printer can be taken.
All our products are produced in line with the ISO 9001:2008, TSE service place competence certificates. The device has CE certificate and barcode.