vaccine refrigerator / cabinet / on casters / 2-door
EKT-B 1450

Add to MyMedicalExpo favorites
Compare this product
vaccine refrigerator / cabinet / on casters / 2-door vaccine refrigerator / cabinet / on casters / 2-door - EKT-B 1450
{{requestButtons}}

Characteristics

  • Applications:

    for vaccines

  • Configuration:

    cabinet

  • Other characteristics:

    on casters, 2-door

  • Capacity:

    Max.: 1,312 l (346.6 gal)

    Min.: 1,166 l (308 gal)

  • Temperature range:

    Max.: 15 °C (59 °F)

    4 °C (39.2 °F)

    Min.: 0 °C (32 °F)

Description

Our kit refrigerators are produced with five different choices of capacity.

- The outer surface of the device has been produced of galvanized sheet with electrostatic
paint resistant to rust and the inner surface is produced of stainless steel sheet.
- Operates with 195-230 V/50 Hz network voltage.
- The door of the device has polyurethane insulated block –door system.It can be locked
and has magnetic seal rings. There is a plastic covered wire shelves in the device that can
be adjusted according to the desire of the user.
- Operates between 0/+15 degrees and it is set to +4 degrees.
- Provides equal temperature distribution with the strengthened fan system it contains.
- Works smoothly and quitely.
- In order to protect the productivity of the device cooling evaporator, there is full-
automatic defrosting system.
- The lightening of the inner cabin of the device is carried out with LED lightening.
- A user-friendly digital control panel with a micro processor has been used on the device. - - This system can keep the data in memory for 30 days.
- There is a USB Output which has got 10 years recording memory that provides the
transmission of the device temperature information to electronic environment if required.
- The thermostat at the control panel of the device can make measurements with 0.1
degree sensitivity.
- There is an accumulator system charged automatically at the control panel of the device. - - This system provides that at possible electricity cut offs the digital control panel and the
thermal printer continue working for 24 hours.