Oxygen pressure regulator A40/IV (0-15)
medicalplug-in typeadjustable-flow

oxygen pressure regulator
oxygen pressure regulator
Add to favorites
Compare this product
 

Characteristics

Fluid type
oxygen
Applications
medical
Connection type
plug-in type
Features
adjustable-flow
Flow

Max.: 15 l/min
(3.96 us gal/min)

15 l/min
(3.96 us gal/min)

Min.: 0 l/min
(0 us gal/min)

Description

Reducer A40 - for medical oxygen The device is used to reduce the pressure of oxygen taken from the bottle Destiny: Supply of medical equipment with oxygen cylinders, pressure reduced to a value of 0.4 0.1 MPa / w. II. III / execution I Reducer integrated with the dispenser and the humidifier (type A21) for driving reactive oxygen therapy; is administered to a patient humidified oxygen or oxygen-air mixture; a container for sterilization (121ºC) execution IV Reduction to administer oxygen to a patient, sequential integrated dispenser (A41), the flow of 0-15 l / min, with an outlet to drain the patient - adjustable flow rate: 0, 2, 4, 6, 8, 10, 12, 15 l / min. execution V Regulator to administer oxygen to the patient primarily intended for emergency medical services, integrated dispenser sequential (A41) with a flow of 0-25 l / min, with exit to drain and quick-adjustable flow rates: 0, 2, 4, 6, 10, 15, 20 25 l / min Technical data: Supply pressure of 2 to 20 MPa The pressure reduced 0.35 ± 0.5 MPa (ver. I, IV, VI) 0.4 0.1 MPa (ver. II, III, V) Flow accuracy of ± 10% of the indicated value on the dispenser or 0.5 l / min Gas flow rate ≥ 100l / min Dampening gas ~ 30% RH Operating temperature 5 ÷ 40 ° C Connector cylinder 3/4 / " Dimensions H x W x D: Cast: I - 329 x 110 x 188 mm lecture II and III - 119 x 144 x 42 mm lecture IV 120 x 145 x 80 mm Cast: V - 89 x 125 x 115 mm

Catalogs

No catalogs are available for this product.

See all of FARUM‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.