Medical ultrasonic bath L

stainless steel

All parts of the bath (body, working container, cover) are made of stainless steel. Description All parts of the bath (body, working container, cover) are made of stainless steel. A piezoelectric element is installed at the bottom of the bath, which converts ultrasonic energy supplied from the generator into mechanical vibrations of the bath bottom and walls leading to cavitation in the washing solution. The following controls are located on the front panel: "Power" button Digital treatment time indicator. UV emitter operation indicator. Heater operation indicator. Digital treatment temperature indicator. "+" and "-" buttons of treatment timer "Start/Stop" button. "+" and "-" buttons to adjust the liquid temperature. Characteristics MAIN PERFORMANCE VALUES Ultrasonic transducer resonance frequency, kHz, - 40±2. Temperature regulator, 0C. . . . from room temperature to +60 Treatment procedure timer, min. . . . 1-99. Supply voltage, V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22010%, 50 Hz Overall dimensions - 260х160х230 mm* * Permissible deviation, no more than ± 5 mm. The bath working container overall dimensions are 240х140х100 mm* Bath weight (outfitted) - 3.7 kg* * Permissible deviation, no more than ± 0.5 kg. Power consumed by the bath - 250 VA The liquid cavitation is provided in the bath over the entire useful volume of the working container. The cavitation effect is provided by the ultrasonic transducer. The bath is equipped with a treatment procedure timer providing for control of instruments treatment time. Timer operation parameters: Range 99 min Increment 1 min *Permissible deviation ± 0.4