A piezoelectric element is installed at the bottom of the bath, which converts ultrasonic energy supplied from the generator into mechanical vibrations of the bath bottom and walls leading to cavitation in the washing solution.
The following controls are located on the front panel:
"Power" button
Digital treatment time indicator.
UV emitter operation indicator.
Heater operation indicator.
Digital treatment temperature indicator.
"+" and "-" buttons of treatment timer
"Start/Stop" button.
"+" and "-" buttons to adjust the liquid temperature.
The bath is equipped with a drain tap to drain the spent washing solution for convenience of the medical personnel.
MAIN PERFORMANCE VALUES
Ultrasonic transducer resonance frequency, kHz, - 40±2.
Temperature regulator, 0C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . from room temperature to +60
Treatment procedure timer, min. . . . 1-99.
Supply voltage, V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22010%, 50 Hz
The bath overall dimensions are 330х265х355 mm*
* Permissible deviation, no more than ± 5 mm.
The bath working container overall dimensions are 295х240х200 mm*
* Permissible deviation, no more than ± 5 mm.
Bath weight (outfitted) - 9 kg*
* Permissible deviation, no more than ± 0.5 kg.
Power consumed by the bath - no more than 700 VA
The liquid cavitation is provided in the bath over the entire useful volume of the working container. The cavitation effect is provided by the ultrasonic transducer with frequency of 40 kHz.
The bath is equipped with a treatment procedure timer providing for control of instruments treatment time.