Medical sterilizer "Ferroplast" - 10 is intended for thermal airborne sterilization of medical and manicure instruments, glass dishes and other cosmetic accessories heat-resistant up to 200 °C. The sterilizer provides for operation modes for disinfection and drying of manicure instruments and thermally-resistant accessories.
The main distinctive features of Ferroplast sterilizers from analogs:
increased performance
model compactness
lightweight version
reduction of warm-up and cooling time
50% increase in surface for the instruments to be sterilized
The sterilization chamber is developed by computer simulation to achieve maximum air injection providing for placing the instruments in the sterilization chamber on 5 shelves at the same time.
Characteristics
Main Data:
Power consumption - 0.9 kW;
Operating voltage 220 V, frequency 50 Hz;
Maximum weight - 13.5 kg;
Time to reach 180 °С mode, no more than 30 minutes;
The useful internal volume of the sterilization chamber is 10,000 ml.
The noise generated by the sterilizer is no more than 65 dBA.
"Ferroplast" sterilize with the sterilization chamber loaded shall provide for automatic maintenance of temperature conditions with an interval of 1 to 999 minutes. The mode data shall correspond to the parameters shown in table 1.
Table 1.
Disinfection 120 45
Drying 85 45
Own mode 50-200 1-999
Note:
*-Permissible deviation ± 3 °С
**-Permissible deviation ±5 %.