These condenser units are the exact solution for direct-evaporation systems and centrifugal air-conditioning units.
Large flexibility using standard version with 2 or 4 scroll compressors 2-circuit system
Cooling operation down to -15 ° C outside temperature
Galvanized steel frame and panels
Condenser made of copper tubes and corrugated aluminum fins
External control of the individual compressors
Unit main switch
Safety devices for all electrical loads
Shut-off valve for liquid and suction gas lines
High and low pressure switches
Stepless valve speed control
The condenser units are connected via refrigerant lines to an evaporator in the fan unit. Therefore, additional buffer tanks, water pipes, frost protection and pumps can be dispensed with.
Depending on the series, the units can not only cool, but are also designed for monovalent heating operation. The refrigerant circuit can be reversed via an integrated 4-way valve, and the evaporator in the centrifugal fan operates as a condenser. This means that with just one appliance, it is also possible to cool and heat all year round.
The unit is suitable for cooling.
The device is a compressor condenser unit. A direct evaporator unit must be used as the evaporator on site.
The device has been designed for outdoor installation on or near the building to be climatized. The outside air is required to ensure the function of the unit.
The refrigerant R407C is used in the unit.