Thermal desorber TD 3.5+

Can be used not only for conventional thermal desorption, but also for direct thermal extraction or direct headspace or SPME injection into the cold CIS. Description The TD 3.5+ is a thermal desorption system with a broad range of applications. It can be used not only for conventional thermal desorption, but also for direct thermal extraction or direct headspace or Solid Phase Micro Extraction SPME injection into the cold Cooled Injection System CIS. The TD 3.5+ impresses due to its full temperature control and its compact design with no cold or active points along the sample path. The TD 3.5+ can be combined with additional GERSTEL modules and therefore forms the basis for a multitude of applications. The operation of the TD 3.5+ can be automated using the MultiPurposeSampler MPS. The system is controlled using the MAESTRO software. The TD 3.5+ is compatible with the 3.5-inch tubes used in the industry as standard. Functional principle of the TD 3.5+ The TD 3.5+ offers a variety of possible applications. During conventional thermal desorption, analytes previously enriched on an adsorbent are thermally desorbed in the TD 3.5+. During direct thermal extraction, analytes from solid or liquid samples are thermally extracted in the TD 3.5+. In both cases, the analytes are located inside thermal desorption tubes. During direct headspace or SPME injection, analytes are injected through the hot TD 3.5+ into the cold CIS and are collected there. Both thermal desorption and thermal extraction are performed in accordance with a temperature program. The temperatures and gas flows within the system can be adjusted individually.