catheter guidewire / urological
Area of the body:
straight-Tip Guide Wire
Gaining access and passing instrumentation during diagnostic and interventional Procedures
Made of best stainless steel grade with pre-coated PTFE technology
Pre coated PTFE guidewires are smoother, consistent coverage that resists flaking
Available in J-tip and straight tip configuration
Offered in oval shape dispenser which made it perfect for urological operation.
For ease of operation by physicians this guidewire have on rigid end and one flexible end.
With protective sheath which prevent the guidewire from possible damages during handling and transportation.
Fully rounded tip of guidewire promotes easier negotiation around ureteral obstructions and prevent and damage to body tissues.
Our guidewire has a uniform PTFE coat and tight tolerance in production make it compatible with all surgical devices and tools.
1:1 torque ratio from tip to the end of guidewire.
sterilized by ETO.
puncture the Vessel with a two-part needle.
When using a two-part needle remove stylet leaving cannula in place, insert flexible (distal) end of guide wire through cannula and into vessel.
“J” guide wires are shipped with “J” straightener to aid in the insertion of the wire into the puncture needle. Advance the straightener until 2-3 mm of the tip extends from the tip. Insert wire into hub and through needle. Remove “J” straightener proximally and discard.
Remove needle cannula leaving the guide wire within the lumen of the vessel.
Pass dilator or catheter over the guide wire directly into the vessel.
Carefully remove the guide wire leaving the catheter in place.