31DTS DRY Model Trimmer
(Total votes: 0)
Handler 31 model trimmer with 10” abrasive disc, 5 gallon cyclone with cartridge filter to trap dust particles for easy disposal. A 62-II super sucker draws a powerful 110 cfm through the cyclone and entraps particles 0.5 microns and larger. Hoses connect the 3 components, dust is removed from the work area and falls into a 5 gallon cyclone cannister.
115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Weight: 95 lbs. (3 boxes per system)
Weight95 lbs. (3 boxes per system)
Dimensions16” D x 13” W x 12 3/4” H [41cm x 33cm x 32cm]
Thank you for purchasing the Handler Dry Model Trimmer system The dry model trimmer system will come in three packages. Unpack your dry model trimmer boxes.
IMPORTANT INSPECT ALL ITEMS FOR DAMAGE BEFORE PROCEEDING SHOULD DAMAGE HAVE OCCURRED IN TRANSIT. CONTACT THE FREIGHT FORWARDER IMMEDIATELY. NOTE ON THE SHIPPING RECEIPT ANY VISIBLE DAMAGE TO THE CONTAINERS DO NOT CONTACT HANDLER MFG. AS DAMAGE MUST BE CLAIMED BY THE RECEIVER OF THE MERCHANDISE NOT THE SHIPPER
After inspection make certain the following components and accessories are packaged with the system
TOOL SAFETY INSTRUCTIONS
1.Keep Work Area Clean
Cluttered areas and benches invite accidents.
2.Avoid Dangerous Equipment
Don't expose power tools to rain. Don’t use power tools in damp or wet locations Keep work area well lit.
3.Keep Children Away
All visitors should be kept safe distance from work area and appliance.
A. Store Idle Tools
When not in use, tools should be stored in dry, high, and locked location out of the reach of children.