Analog hotplate CERAN®4 SR, CERAN®44 SR
for laboratory liquids

analog hotplate
analog hotplate
Add to favorites
Compare this product
 

Characteristics

Display
analog
Applications
for laboratory liquids

Description

CERAN® - is an extraordinary glass ceramic - highly resistant to breakage and temperature changes, will not distort, permeable to ultra-violet light and also highly acid-resistant. Construction: the low-mass CERAN® plate is electrically heated over its full surface, and is embedded into a high-grade, stainless steel frame which is mounted on an internally insulated stainless steel housing. The temperature control system is regulated by an electronic NiCr-Ni temperature sensor (regulation range between 50 and 500°C). The controller is built into a pressure-cast aluminium casing. The heating time for 500°C is approximately 8 minutes. Four feet, which can be individually adjusted to an approximate height of 8 mm, ensure a wobble-free, horizontal stability. Type 4 SR is also equipped with 4 retort rod sockets (situated 100 mm from each other). In the EB Series, the electrical connection between the controller and the hot plate is protected by a flexible metal hose.

Catalogs

No catalogs are available for this product.

See all of Harry Gestigkeit‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.