W.S. TYLER® Ro-Tap® RX-30 with CE labelling
The W.S. TYLER® Ro-Tap® RX-30 for test sieves up to 305 mm diameter reproduces the circular and tapping motion of hand sieving but with an even mechanical action. It differs from the W.S. TYLER® Ro-Tap® RX-30 in the safety cupboard which is necessary for CE conformity.
Most suitable machine for abrasive materials
The safety cupboard and an separate control gear meets the demands of job safety that are necessary for CE-labelling in Europe.
Enables sieving of agglomerating bulk materials.
Prescribed in the FEPA-standard for abrasive industry.
Further advantages at a glance
The 3D sieving action saves time and manual re-sieving.
Easy handling – only sieving time has to be set.
Sieve diameters 300 mm, 305 mm (12")
Sample weight approx. 6 kg
Operating voltage 230 Volt or 115 Volt, 50-60 Hertz
Timer 0-99 minutes
Taps per minute 150
Oscillations per minute 278
Drive electric motor with worm gear
Sound emission 70 dBA
Weight approx. 124 kg (without test sieves)
Dimensions 890 x 610 x 740 mm (B x T x H)
W.S. TYLER® Ro-Tap® RX-30 CE - application examples
Metal powder and metal swarf
Suitable test sieves for your application
It depends on your application which test sieves should be used for sieve analysis with the W.S. TYLER® Ro-Tap® RX-30 CE. It is suitable for up to 5 test sieves with full height or 12 half-height sieves and one sieve pan with a diameter of up to 305 mm (12”) or 300 mm.