W.S. TYLER® Ro-Tap® RX-30 for dry sieving
The W.S. TYLER® Ro-Tap® RX-30 for test sieves up to 305 mm diameter reproduces the circular and tapping motion of hand sieving but with an even mechanical action. The W.S. TYLER® Ro-Tap® RX-30 is manufactured by W.S. TYLER®, the American subsidiary of HAVER & BOECKER.
Most suitable machine for abrasive materials
Enables sieving of agglomerating bulk materials.
Prescribed in the FEPA-standard for abrasive industry.
Further advantages at a glance
The 2D sieving action saves time and manual re-sieving.
Easy handling – only sieving time has to be set.
Sieve diameters 300 mm, 305 mm (12")
Sample weight approx. 6 kg
Operating voltage 230 Volt or 115 Volt, 50-60 Hertz
Timer 0-99 minutes
Taps per minute 150
Oscillations per minute 278
Drive electric motor with worm gear
Sound emission 86 dBA
Weight approx. 82 kg (without test sieves)
Dimensions 710 x 540 x 640 mm (B x T x H)
W.S. TYLER® Ro-Tap® RX-30 - application examples
Metal powder and metal swarf
Suitable test sieves for your application
It depends on your application which test sieves should be used for sieve analysis with the W.S. TYLER® Ro-Tap® RX-30. It is suitable for up to 5 test sieves with full height or 12 half-height sieves and one sieve pan with a diameter of up to 305 mm (12”) or 300 mm.
Please note that the W.S. TYLER® Ro-Tap® RX-30 without cupboard does not reach the requirements of CE-labelling. We therefore recommend to use the CE-execution with safety cupboard with external control gear (W.S. TYLER® Ro-Tap® RX-30-CE).