Biostimulation laser Laserpulse

biostimulation laser
biostimulation laser
biostimulation laser
biostimulation laser
biostimulation laser
biostimulation laser
biostimulation laser
Add to favorites
Compare this product


Amplifying medium


The equipment Laserpulse is equipment microcontrolled by low power therapeutic laser, designed for use in physical rehabilitation and esthetics. It presents a toposcopic circuit to locate the acupuncture points and the possibility of operation with 3 laser pens: Laser Probes (Po – 30MW and 660nm), AlGaInP (Po – 30MW and 830nm) and GaAlAs (Po – 70W peak and 904nm). The emission mode of the laser beam in the 660nm and 830nm pens can be adjusted in the continuous mode or pulsed mode (50%), with possibility of choice of 10 modulation frequencies: 2.5Hz, 5Hz, 10Hz, 20Hz, 75Hz, 150Hz, 300Hz, 700Hz, 1KHz or 2KHz. The 904nm pen operates only in pulsed mode at 10KHz, with automatic calculation of irradiation time. These frequencies treat analgesia by different physiological ways. O Laserpulse does not cause adverse physiological effects. *The pens are sold separately. The equipment must be used only under prescription and supervision of a licensed professional. Accessories 1 power cable; 1 toposcopic pen kit cable; 1 protection fuse; 1 instructions manual. Optional Accessories Laser pen Probe 660nm; Laser pen Probe 830nm; Laser pen Probe de 904nm; Protection goggles. The use of cables, electrodes and other accessories different from those specified above may result in increase of emissions or decrease of the immunity of the equipment. The device and its characteristics may suffer alterations without previous notice. Indications Infrared laser 830nm and 904nm: Analgesia; Inflammatory process; Tissue healing; Traumato-orthopaedic rehabilitation.



No catalogs are available for this product.

See all of Ibramed‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.